Adiquate result from my "slightly adjusted" Griffi

For V8 Forum Members only, Please list rolling road & dyno posts in here please

Moderator: phpBB2 - Administrators

User avatar
Eliot
Top Dog
Top Dog
Posts: 1734
Joined: Sat Nov 18, 2006 9:46 am
Location: Milton Keynes
Contact:

Post by Eliot » Sun Mar 16, 2008 10:31 am

has "vixpy" seen the graph? he's usally quite good at spotting dyno errors.


Eliot Mansfield
5.7 Dakar 4x4, 4.6 P38 & BMW 750i
www.mez.co.uk / www.hptuners.co.uk

dnb
Knows His Stuff
Knows His Stuff
Posts: 405
Joined: Thu Mar 29, 2007 12:20 pm

Post by dnb » Mon Aug 11, 2008 9:56 pm

The problems have actually presented themselves now, by the usual method of getting worse so they were noticable in normal driving...

One of the induction hoses was beginning to collapse.

The brake servo diafragm failed (this unbalanced the plenums and made the car untunable at low airflows, but didn't affect it at high load)

HT leads were beginning to disintegrate through heat.

The result was 157 bhp, 330 ftlbs (both at 2400 rpm) and a very dead clutch!

Post Reply

Return to “Rolling Roads And Dyno's”