Page 1 of 1
Land Rover Brake Master Cylinder
Posted: Mon Nov 26, 2007 6:22 pm
by Coops
Calling all 4x4 owners,
im after the land rover part number for a master cylinder used on the 2.25 series 3 i think its a 23.8mm bore one.
the lucas part number is: Land Rover 2.25 series 3 - 77-82 - Lucas no PMK177
i need the landy number to order one,
anyone help???
Posted: Mon Nov 26, 2007 7:18 pm
by sowen
My parts cat. lists them as 90569126 (88in up to 1980) or 90569128 (88in from 1980 + all 109in), hope this helps.
Simon
Posted: Mon Nov 26, 2007 7:31 pm
by Coops
cheers simon,
does it have any letters at the start like LRC etc?
Posted: Mon Nov 26, 2007 7:56 pm
by sowen
There are no letters for the brake master cylinder part nos., unless the original land rover part has been superceded, which is very common in my experience. A good land rover specialist should recognize it immediately for you, even if its not a current number.
Simon
Posted: Mon Nov 26, 2007 11:41 pm
by Coops
Hi Simon,
them numbers i gave were not what we wanted,
we want this one.
77-82 = 23.8mm bore tandem cylinder
not sure what its off landy wise though mate,
not sure if these numbers mean anything?
74066091
Posted: Tue Nov 27, 2007 12:16 am
by Coops
have found these master cylinders:
NRC8690
NRC9529
can't find what size the bore is though and what make if they are girling
Posted: Tue Nov 27, 2007 6:48 pm
by sowen
I can't find 74066091 or NRC9529 in my landy parts catologues but I have found NRC8690 in my land rover 110 up to august 1986 cat.
I think it is the same as I have fitted to my landy and looks like this:
Don't know about the bore size though.
Simon
Posted: Wed Nov 28, 2007 5:45 pm
by cimoss
try this for size think it should give the info you need.....
http://www.shouieco.com.tw/index.php?act=bc&cy=20
chris