Page 1 of 1

Multivalve coil

Posted: Thu Dec 12, 2024 5:55 pm
by ElGrigon
Hello,

I have an issue every half a year that may LPG tank multivalve fails.

A coil is 12V 11W and when operating it gets very hot to touch.

Since a few days ago happend again and I replaced it with a new one, I put the old one on the bench to test.
It still works but here are some pictures of the results.
What are your thoughts?

Re: Multivalve coil

Posted: Thu Dec 12, 2024 5:58 pm
by ElGrigon
This was in first 10min. Later on the temp. raised to 145•C

Re: Multivalve coil

Posted: Fri Dec 13, 2024 3:11 pm
by stevieturbo
And are you sure it's supposed to operate at 12v, and not maybe reduced down ?

That seems an extreme temperature to be running at, no way can it be normal.

Re: Multivalve coil

Posted: Sat Dec 14, 2024 4:07 pm
by ChrisJC
I wonder if it uses the rest of the valve as a heat sink...? Or is supposed to.

Chris.

Re: Multivalve coil

Posted: Sat Dec 14, 2024 10:44 pm
by Ian Anderson
I had a thaught perhaps it is expected to be running a fluid and that the fluid will draw and move the heat away

Re: Multivalve coil

Posted: Sun Dec 15, 2024 10:45 pm
by stevieturbo
Have you reached out to any LPG places ?

https://lpgshop.co.uk/valve-coils/