Page 1 of 1
PEM101130 connection sizes.
Posted: Tue Aug 04, 2020 9:06 am
by jenko
On the off chance, does anyone know the port sizes on the pem101130 Thermostat . I realise the main rad in and out are 32mm, it's the other two (thermostat bypass and header tank / heater) connection sizes im looking for. I suspect they are either 16mm or 19mm, or indeed a mix of both....but, could be wrong on that?.
Re: PEM101130 connection sizes.
Posted: Wed Aug 05, 2020 8:57 am
by ChrisJC
I think they are 19, but I will measure one later.
Chris.
Re: PEM101130 connection sizes.
Posted: Wed Aug 05, 2020 9:05 am
by jenko
Thanks Chris.....That was my thinking...the outlet on the manifold is 19mm.
Re: PEM101130 connection sizes.
Posted: Wed Aug 05, 2020 4:05 pm
by ChrisJC
The middle one is 19mm and the one at an angle is 21mm.
Chris.
Re: PEM101130 connection sizes.
Posted: Thu Aug 06, 2020 6:08 am
by jenko
Thanks Chris......I can get on with ordering the hoses...cheeers...Paul