14 CUX Throttle Pot Sensor

General Chat About Electrics, And Ignition Systems.

Moderator: phpBB2 - Administrators

Post Reply
Robrover
Getting There
Getting There
Posts: 329
Joined: Sat Nov 25, 2006 3:46 am
Location: Adelaide, Australia

14 CUX Throttle Pot Sensor

Post by Robrover » Fri May 04, 2018 8:32 am

The OEM TPS can and does fail albiet after 60 to 80k. ERR2263 is no longer available. What's out there that works?



DaveEFI
Forum Contributor
Forum Contributor
Posts: 3911
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

Re: 14 CUX Throttle Pot Sensor

Post by DaveEFI » Fri May 04, 2018 9:44 am

Do you know the track resistance? There are generic TPS out there and one might be suitable. You'd look for them from firms who sell aftermarket injection like MegaSquirt.

We did source a replacement from RS components for the one used on the flapper injection, which required an adaptor plate made. But sadly that appears to be no longer available. Such things these days tend to be electronic rather than a simple pot.
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y

Robrover
Getting There
Getting There
Posts: 329
Joined: Sat Nov 25, 2006 3:46 am
Location: Adelaide, Australia

Re: 14 CUX Throttle Pot Sensor

Post by Robrover » Tue May 08, 2018 8:38 am

I think throttle closed needs to be 0.30v and WOT about 4.90v - 5.0v.

Post Reply

Return to “Electrical & Ignition Area”