Page 1 of 1
3.9 Rover v8 basic ignition wiring
Posted: Fri Oct 28, 2016 6:18 pm
by murraybuilt
Hey guys, I've got a 1988 RR 3.9 v8 efi that I'm gonna run on carbs , but want to keep the electronic ignition.
Looking at wiring diagrams it seems as simple as running the two wire from the ignition amplifier on the Dizzy to either side of the coil?
Is this right , or am I missing something?
cheers
Andy
Posted: Fri Oct 28, 2016 7:01 pm
by James 33
That's what I've just done.
Posted: Fri Oct 28, 2016 8:56 pm
by murraybuilt
Ok, that work then, engine runs fine etc?
thanks
Andy
Posted: Fri Oct 28, 2016 9:39 pm
by James 33
Yes only ran it up a couple of times but seems to run ok.
Re: 3.9 Rover v8 basic ignition wiring
Posted: Sat Oct 29, 2016 9:18 am
by DaveEFI
murraybuilt wrote:Hey guys, I've got a 1988 RR 3.9 v8 efi that I'm gonna run on carbs , but want to keep the electronic ignition.
Looking at wiring diagrams it seems as simple as running the two wire from the ignition amplifier on the Dizzy to either side of the coil?
Is this right , or am I missing something?
cheers
Andy
Yes - and of course +12v to the coil positive.
Posted: Mon Oct 31, 2016 3:24 pm
by murraybuilt
