Page 1 of 1
Serp engine without air con
Posted: Wed Jun 08, 2016 1:25 pm
by shanecl
Guy's
The serp engine I have has air con and I want to remove it but not be left with the horrible bracket, does anyone know where I could get the bracket to tidy up the engine.
Posted: Wed Jun 08, 2016 6:45 pm
by tonio7#
hi, sorry, french guy
I have a 4.6l with serpentine 3.9
I have a 300tdi pulley "tension" with a more short belt
avantage, iron pulley , it don't affraid hot and don't melt
belt ERR6191
Re: Serp engine without air con
Posted: Mon Jun 13, 2016 5:20 pm
by richardpope50
shanecl wrote:Guy's
The serp engine I have has air con and I want to remove it but not be left with the horrible bracket, does anyone know where I could get the bracket to tidy up the engine.
Make one? I just did but if you can't weld cut the metal yourself and get a local company to weld it for you. I fitted a sprung idler wheel from my original donor to my home made bracket.
Posted: Mon Jun 13, 2016 7:21 pm
by shanecl
Not a bad idea. Could you stick up a photo of your just to give me a starting point.
Posted: Wed Jun 15, 2016 5:44 pm
by richardpope50
Posted: Thu Jun 16, 2016 11:27 am
by shanecl
That's tasty and great idea. Will fab up one. Thanks Richard
Posted: Fri Jun 17, 2016 3:10 pm
by richardpope50
Sorry the paint does not look too good but I had to slightly alter it the other week and the paint was too thick and it shows. Now on a 'to do' list!
My welding was not too good either still the public don't look there!
Posted: Fri Jul 01, 2016 6:15 pm
by shanecl
I was in a mad panic to get the build finished so I chopped up the P38 bracket. I cut along a rib and then buffed the cut roundy. It actually cam out pretty well after a lick of paint.
