RV8/TVR 4.0 Purge Control Valve advise please...
Posted: Mon Aug 10, 2015 7:10 pm
The MG V8 conversion continues...and I need some advise on the purge control valve i.e., is it really necessary on this engine?
If not, what signal will the 14CUX expect with no PCV installed...? All advise/recommendations greatly received. Thank you, v8250
Update: okay, the PCV is only there to manage unspent hydro carbons with the ECU only sending the signal to the PCV to open :. if I install no PCV/carbon canister system/no connection to the inlet I can install a vented fuel filler cap to provide the same vent function to any excess fuel vapours...
...have I missed anything...?
If not, what signal will the 14CUX expect with no PCV installed...? All advise/recommendations greatly received. Thank you, v8250
Update: okay, the PCV is only there to manage unspent hydro carbons with the ECU only sending the signal to the PCV to open :. if I install no PCV/carbon canister system/no connection to the inlet I can install a vented fuel filler cap to provide the same vent function to any excess fuel vapours...
...have I missed anything...?