The V8 Owners Forum -

Posted: **Tue Feb 17, 2015 12:54 pm**

Hi,

I need to identify 2 camshafts.

Those 2 were found in 4.6 blocks and i believe they are not standard.

One is marked CWC 18 with some red paint on the casting.

http://www.heberger-image.fr/images/410 ... 6.jpg.html
http://www.heberger-image.fr/images/293 ... 7.jpg.html
http://www.heberger-image.fr/images/154 ... 8.jpg.html

Other is KCH200 07 05 08 and either JF or JE on the casting.

http://www.heberger-image.fr/images/969 ... 0.jpg.html
http://www.heberger-image.fr/images/510 ... 9.jpg.html

Do you know that stuff?

Posted: **Tue Feb 17, 2015 3:10 pm**

Cant help on the 1st one but I hink you may find they are foundry identification marks where as the 2nd one is a Kent Cams H200 a fairly mild grind.

Posted: **Tue Feb 17, 2015 4:10 pm**

The red paint usually indicates a standard 4.6 cam.
If it was orange it would be a 4.0 cam.

Regards Denis

Posted: **Wed Feb 18, 2015 5:38 pm**

Thanks for the infos guys.

The Kent will go back into a rebuilt 4.6 with 4.0 pistons.

We'll see how it goes on the dyno.

Camshaft identification