Low comp landy conversion questions
Posted: Mon Oct 20, 2014 4:41 pm
Hi guys looking for info
I'm converting my 85 vw t25 to run 3.5 low comp landrover engine
I've stripped the engine
Re-newed all the bearings the piston rings all new gaskets and seals
checked everything over turns out I need a cam and lifters are there badly worn
Can I fit a 3.9 cam? If not
Is there any benefits from fitting a high lift cam to a low comp engine
I know the engines 136bhp
Would really like to see 150hp
What's the best advice on tuning and ect on this engine
Any info would be great thanks
Craig
I'm converting my 85 vw t25 to run 3.5 low comp landrover engine
I've stripped the engine
Re-newed all the bearings the piston rings all new gaskets and seals
checked everything over turns out I need a cam and lifters are there badly worn
Can I fit a 3.9 cam? If not
Is there any benefits from fitting a high lift cam to a low comp engine
I know the engines 136bhp
Would really like to see 150hp
What's the best advice on tuning and ect on this engine
Any info would be great thanks
Craig