Preasure testing
Posted: Sun Nov 03, 2013 1:19 pm
How much preasure should be put through the block when doing a preasure test?
I did it about 30psi, which is about twice what it sees when the engine is running.
Chris.
The V8 Owners Forum -
Welcome to the well-known V8 Owners Forum, no matter what you drive if its V8 Powered you'll be made very welcome.
https://www.v8forum.co.uk/forum/
Preasure testing
Page 1 of 1
Posted: Sun Nov 03, 2013 2:46 pm
Posted: Sun Nov 03, 2013 3:11 pm
Thanks chris, would running hot water through it first be enough to get it up to temp?
Posted: Sun Nov 03, 2013 6:05 pm
yes use hot water if you can.
Best regards
Mike
Best regards
Mike
Posted: Sun Nov 03, 2013 9:30 pm
It will get up to temp by aiming a space heater at it for 20 minutes too thus heating up the block water jacket inc the water in it. 