NODIZ Pro-8
Posted: Fri May 10, 2013 10:00 am
Hi everyone 
A while back after the release of our new NODIZ Pro Ignition controller, we were asked by a few of you guys about the possibility of an 8 cylinder version...
Well I am please to say that the prototype PCBs are back from manufacture and so far, testing has gone VERY well indeed!
Here's a couple of pics of the PCB under test...
Note the four coil drivers (only two are populated at the moment) on board so no need for EDIS modules or anything like that, and we are also working on a very trick mounting system for the unit too (think distributor/coil pack/controller all in one
)
Here's some vids of the added features, beyond that of fully 3D mappable ignition...
http://www.youtube.com/watch?v=x-UbGxYk2pk
Anyway, onto the point of the post...
Who is local to us who wants to try one out for free? We have a Plymouth baracuda V8 for testing here but its not yet roadworthy so we are after a lucky guinea pig to put some road miles on one!
Let me know
Matt
A while back after the release of our new NODIZ Pro Ignition controller, we were asked by a few of you guys about the possibility of an 8 cylinder version...
Well I am please to say that the prototype PCBs are back from manufacture and so far, testing has gone VERY well indeed!
Here's a couple of pics of the PCB under test...
Note the four coil drivers (only two are populated at the moment) on board so no need for EDIS modules or anything like that, and we are also working on a very trick mounting system for the unit too (think distributor/coil pack/controller all in one
)Here's some vids of the added features, beyond that of fully 3D mappable ignition...
http://www.youtube.com/watch?v=x-UbGxYk2pk
Anyway, onto the point of the post...
Who is local to us who wants to try one out for free? We have a Plymouth baracuda V8 for testing here but its not yet roadworthy so we are after a lucky guinea pig to put some road miles on one!
Let me know
Matt