Measurement favour please
Posted: Sat Mar 16, 2013 4:14 pm
Anyone with a 4.6 Serp motor or block to hand able to let me know the height of the crank centreline above the sump gasket surface please? Much appreciated if so.
The V8 Owners Forum -
Welcome to the well-known V8 Owners Forum, no matter what you drive if its V8 Powered you'll be made very welcome.
https://www.v8forum.co.uk/forum/
Measurement favour please
Page 1 of 1
Posted: Mon Mar 18, 2013 7:49 am
Been told it's 58mm in round figs; sound right?
Posted: Mon Mar 18, 2013 1:23 pm
pupp wrote:Been told it's 58mm in round figs; sound right?
I have measured it today at 58mm.
Regards
Denis
Posted: Mon Mar 18, 2013 5:48 pm
Measured my block and it is 58 mm.
Posted: Mon Mar 18, 2013 7:17 pm
Thanks guys, very helpful 