Anyone used the Crower 50233 (Dyno graph inside)
Posted: Sun Nov 18, 2012 7:59 pm
Hi all, I'm looking for any experience or dyno sheets of the crower 50233 cam.
Im currently running a Kent H214 with stage 2 heads in a 3.9, see the dyno sheet below.
Not sure if the 50233 would be an upgrade or a sideways step looking at the specs. Interested in when it comes on cam, what RPM it peaks, torque curve etc
http://imageshack.us/a/img341/9441/p1030759.JPG
Cheers
Ben
Im currently running a Kent H214 with stage 2 heads in a 3.9, see the dyno sheet below.
Not sure if the 50233 would be an upgrade or a sideways step looking at the specs. Interested in when it comes on cam, what RPM it peaks, torque curve etc
http://imageshack.us/a/img341/9441/p1030759.JPG
Cheers
Ben