Page 1 of 1
Land Rover 110 V8.Vibration.
Posted: Fri Jul 13, 2012 9:01 am
by nickm
I have a 110 V8 CSW.It has always had a vibration/coarseness through the driveline.It makes no difference whether in or out of gear[coasting].I have fitted new genuine props,good s/hand t/box/new cv joints/swivels,wheel bearings all to no avail.The gearbox is an LT85 and seems ok.Any suggestions as to the cause would be gratefully received.Nick
Posted: Fri Jul 13, 2012 12:08 pm
by ChrisJC
OK:
1. Try it with the transfer box in neutral
2. Remove a prop, and the drive flanges at that end. You might get a spot of grease coming out, but it will eliminate the prop / diff / halfshafts.
3. Can you get another set of wheels to try?
Chris.
Posted: Fri Jul 13, 2012 2:36 pm
by Alley Kat
Prop phasing maybe? Engine/box mounts good?
Posted: Fri Jul 13, 2012 4:00 pm
by Ian Anderson
Tyres not round or delaminating
Ian
Posted: Fri Jul 13, 2012 5:25 pm
by DEVONMAN
Don't know much about the 110 but if it's got a hand brake drum on the prop it's worth checking to see if it's out of balance.
Cheers Denis