Page 1 of 1
Edelbrock 1404 air filter stud
Posted: Fri Jun 08, 2012 11:57 pm
by JC.
Anyone know what size thread the air filter retaining stud should be on an Edelbrock 1404 carb?
Thanks in advance!
Posted: Sat Jun 09, 2012 6:22 am
by john 215
Hi,
Brought a dome nut for the top of mine and it was if remember correctly 1/4 UNC, i assume the stud is the same both ends, and UNC is often used on alloy.
Cheers John
Posted: Sat Jun 09, 2012 9:53 am
by Eliot
i would go with 1/4 unc too
Posted: Sat Jun 09, 2012 5:45 pm
by JC.
Cheers gents!
Posted: Sat Jun 09, 2012 8:14 pm
by mgbv8
If you cant find anything local Jon I'm sure I got mine from my nut and bolt man in Slough. I can get a length of stud and post it to you if you want ?
Pel
Posted: Thu Jun 14, 2012 10:05 pm
by JC.
All sorted, thanks dude!