Oil pressure relief valve piston removal ; help needed .
Posted: Thu Feb 02, 2012 3:30 pm
Hi , Can anyone tell me how to remove the piston from the oil pressure relief valve on a Rover V8 , before I start gouging at it ? Thanks .
The V8 Owners Forum -
Welcome to the well-known V8 Owners Forum, no matter what you drive if its V8 Powered you'll be made very welcome.
https://www.v8forum.co.uk/forum/
Oil pressure relief valve piston removal ; help needed .
Page 1 of 1
Posted: Thu Feb 02, 2012 4:24 pm
If its in-situ I normally find a slight twist & wiggle with a ball-ended allen key is enough to gently tease it out.
Posted: Thu Feb 02, 2012 4:56 pm
Engine in place and still have oil?
Crank it over on the starter - it should pop out
Ian
Crank it over on the starter - it should pop out
Ian
Posted: Wed Mar 28, 2012 11:15 pm
How did you get it out in the end? Mine is being a real byitch too!!
Posted: Wed Mar 28, 2012 11:39 pm
I never did !
Posted: Thu Apr 05, 2012 7:17 am
When mine was stuckin they apparently blew it out with an airline, and a magnetic tool to move it about, not sure where the airline attached never askedikari1 wrote:How did you get it out in the end? Mine is being a real byitch too!!
when it came out it had a very slight burr on it.Thanks
Simon