Page 4 of 6
Posted: Sun Nov 11, 2007 7:38 pm
by Coops
found out the filter thread sizes today too.
so updated the order list
dont earls do a catalogue?
just a downloadable text file?
Posted: Sun Nov 11, 2007 11:52 pm
by stevieturbo
Earls do a catalogue....just phone em and ask for it.
I have it here
Posted: Mon Nov 12, 2007 12:24 am
by Coops
ta mate,
looking at ordering in from over the pond too at the moment.
Posted: Mon Nov 12, 2007 12:27 am
by stevieturbo
Summit would be the obvious choice.....
Although, dont forget to ask the UK guys for discount. Earls give me about 25% off list.
But TBH, Whilst I could have bought from the US, its handy buying local, then if you find you dont need certain bits, they will happily take them back, and refund you ( obviously un-used of course )
Posted: Mon Nov 12, 2007 12:31 am
by Coops
thats handy to know,
will try the uk lot first then and see if i can get any discount
Posted: Mon Nov 12, 2007 12:46 am
by stevieturbo
I bought a new helmet from GPR a few months ago when I visited the shop.
Simpson, open face. Something like £320 or so...
Usually places like that arent big on discount. But I thought, what the hell, I may as well ask.
Got it for £260 lol...and I didnt even haggle to get it down to that !!!!
lesson to be learnt. ALWAYS ask for discount.
Posted: Mon Nov 12, 2007 12:48 am
by Coops
very true mate,
Posted: Wed Dec 05, 2007 11:51 pm
by Andy515666
Tony got ya some prices. These prices I have INCLUDE tax which here is 12.5%
£16.74 x5 Hose stainless steel twin braid nitrile, -6 General purpose £83.70
($43) £16.32 x3 Hose-end aluminium 90 deg bend for 100-06 hose £48.96 ($215)
($10.55) £6.36 x1 Hose-end aluminium straight for 100-06 hose £6.36 ($10.55)
(15.50) £4.96 x2 Aluminium male/male -06 jic to m12 x 1.5 adaptor £9.92 ($31)
($8.30) £2.46 x1 weld on -06 male nipple £2.46 ($8.30)
($6.10) £2.88 x2 Aluminium male/male -06 jic to -06 jic adaptor £5.76 ($12.20)
($13.90) £6.61 x1 Coupler aluminium, straight twin swivel female to female -06 to -06 £6.61 ($13.90)
($21.30) £5.65 x1 Aluminium male/male -06 jic to m14 x 1.5 adaptor £5.65 ($21.30)
Posted: Thu Dec 06, 2007 12:04 am
by Coops
Cheers mate,
need to work out what the postage etc will be now
Posted: Mon Jan 21, 2008 7:11 pm
by Coops
I have not forgotten about this mate so dont worry
Posted: Sun Dec 14, 2008 11:12 pm
by Coops
any one used these guys?
http://stores.ebay.co.uk/autofittings
as they list nearly every bit i need bar one fitting, the m14 to 6an (filter)
Posted: Wed Jan 14, 2009 5:26 pm
by Coops
im going to sound thick now
6an is that the same as -6?
and jic???
Posted: Wed Jan 14, 2009 5:45 pm
by stevieturbo
Yes
Posted: Wed Jan 14, 2009 5:53 pm
by Coops
ta stevie, going to write out my shopping list for the fuel hose and fittings now
Posted: Wed Jan 14, 2009 6:58 pm
by Ian Anderson
Dash 6 = 6/16 inch = 3/8 inch =8mm
Ian