Posted: Sun Jun 03, 2007 10:17 pm
looks like sorting out the sensor grounds got rid of all the noise anyway. 
looks lot cleaner now dont it.
the full datalogs are here mate:
http://www.v-8.org.uk/zipfiles/latestlogs.zip
The V8 Owners Forum -
Welcome to the well-known V8 Owners Forum, no matter what you drive if its V8 Powered you'll be made very welcome.
https://www.v8forum.co.uk/forum/
My Supercharged V8 Capri Conversion
Page 11 of 79
Posted: Sun Jun 03, 2007 10:22 pm
Posted: Sun Jun 03, 2007 10:40 pm
Much cleaner. I thought your voltage was all over the place but then I looked at the scale and its only .4 of a volt so is ok. At long last your getting there. Hows the cold start these days?
Posted: Sun Jun 03, 2007 10:54 pm
thats still a poop,
but i can live with that as the car starts perfect when hot,
and she spends more time hot than cold
it starts when cold and will idle very low though, as in 600rpm but have adjusted all sorts to stop it stalling but it either stalls straight away after adjustment, or wont start, so put the settings back and left it be.
we have cleaned the air filter today as that was caked in dirty and dead insects etc,
and it ran a lot smoother while out for a spin after this also.
so will see what it does to the cold starting if anything.
but i can live with that as the car starts perfect when hot,
and she spends more time hot than cold
it starts when cold and will idle very low though, as in 600rpm but have adjusted all sorts to stop it stalling but it either stalls straight away after adjustment, or wont start, so put the settings back and left it be.
we have cleaned the air filter today as that was caked in dirty and dead insects etc,
and it ran a lot smoother while out for a spin after this also.
so will see what it does to the cold starting if anything.
New engine
Posted: Wed Jun 13, 2007 10:09 pm
well only just got the car to the track and on the road proper, and im already starting to work out building the spare engine,
its a 3.9 a very tidy engine, the bores are good too,
now what shall i do with it?
its a 3.9 a very tidy engine, the bores are good too,
now what shall i do with it?
Posted: Fri Jun 29, 2007 9:04 pm
well what a day,started removing the old alarm system at 10.30am ready for fitting the new cat1 clifford,
and have just come in, the car is now fully alarmed again, just the intelli start to finidh installing over the weekend,
and have just come in, the car is now fully alarmed again, just the intelli start to finidh installing over the weekend,
Posted: Sat Jun 30, 2007 4:51 pm
That engine, forged pistons, higher c/r and ALOT of nos! Trev ran a 3.5 with an 11:1 c/r plus that infamous 700hp nos shot. You'll be showing Stevie the way down the track with that much poke!
Posted: Thu Jul 26, 2007 10:28 pm
got my alarm system back from clifford today,
it was sent back a week ago as it was not behaving itself,
the work sheet that came back stated eprom corruption both on the main alarm brain and the intellistart brain.
they reprogrammed both units FOC the main alarm is now working sweet.
Interpart are coming over tomorrow evening to program the intelli start unit up with their laptop and clifford software.
it was sent back a week ago as it was not behaving itself,
the work sheet that came back stated eprom corruption both on the main alarm brain and the intellistart brain.
they reprogrammed both units FOC the main alarm is now working sweet.
Interpart are coming over tomorrow evening to program the intelli start unit up with their laptop and clifford software.
Posted: Fri Jul 27, 2007 12:23 pm
ihatesissycars wrote:Trev ran a 3.5 with an 11:1 c/r plus that infamous 700hp nos shot.
. 700hp of nitrous, How long did the engine last or was it just one run. If so, what time did he run or was it else where just to see what happened ??? 
Posted: Fri Jul 27, 2007 12:46 pm
9 Sec's rings a bell.
Posted: Fri Nov 30, 2007 5:32 pm
uploaded the 16x14 tables to ecu today and its all crashed
now the ecu and laptop dont talk to each other and i got a car that won't start
at least i have the winter to try and sort it out
now the ecu and laptop dont talk to each other and i got a car that won't start
at least i have the winter to try and sort it out
Posted: Sat Dec 01, 2007 9:22 am
Its times like these that those knackered old carbs start looking tempting again!
I have a new honed to size RS cam bearings spare if you want them for a future build? (foc )
I have a new honed to size RS cam bearings spare if you want them for a future build? (foc
)Posted: Sat Dec 01, 2007 9:35 am
cheers Gav,
if they are going spare they will always be handy mate
i know what you mean about the carbs,
BUT i will soldier on, as i recon the car will benefit more by running the 16x14 mapping tables over the 12x12 ones,
looks like another winter in the garage with the ecu in bits
if they are going spare they will always be handy mate
i know what you mean about the carbs,
BUT i will soldier on, as i recon the car will benefit more by running the 16x14 mapping tables over the 12x12 ones,
looks like another winter in the garage with the ecu in bits
Posted: Sat Dec 01, 2007 9:42 am
Pm me your address and I'll send them on!
Posted: Sun Dec 02, 2007 12:03 pm
monty man came over today, and this still had us both beaten,thev8kid wrote:uploaded the 16x14 tables to ecu today and its all crashed
now the ecu and laptop dont talk to each other and i got a car that won't start
at least i have the winter to try and sort it out
so:
we have finally got the ole gal running again (phew)
but back on the 12x12 set up until we can work out why it went wrong.
but she is mobile again which is good.