Page 2 of 2
Posted: Tue Aug 05, 2014 10:21 am
by stevieturbo
Not sure on the makup of those Felpro's
But many many years ago I used Felpro on my 3.9. Compared to Payen or OEM 4.6 gaskets, those old composite Felpro's were complete dung
And they were a total nightmare to clean off the block/heads too !
OEM Payen 4.6's usually come off spotlessly clean.
Posted: Tue Aug 05, 2014 12:02 pm
by unstable load
Posted: Wed Aug 06, 2014 6:47 pm
by Seight-V8
anyone used these ones from RPI?
http://www.ebay.co.uk/itm/3-9-4-2-V8-Co ... 233e94c42e
Doesn't look like as much metal between the cylinders like on the elrings though, but RPI do recommend them, so should be good?
The elrings do seem to have more metal between the cylinders as seen here...so maybe these are better?
http://www.ebay.co.uk/itm/LAND-ROVER-V8 ... 5af5a8aa66
cheers
scott
Posted: Wed Aug 06, 2014 9:09 pm
by stevieturbo
Whilst difficult to tell from a photo, and whether the photo is actually the parts.
This full set doesnt look like bad value, and pic looks like decent quality items
http://www.ebay.co.uk/itm/RANGE-ROVER-D ... 1e557a74bc
Either way, stick with Payen or OEM.
Elrings may be the same, cant comment as I've never used them.