Page 2 of 2
Posted: Thu Aug 29, 2013 9:42 pm
by Blown v8
Here's mine,
Duration at .050 lift intake 234*
Exhaust 244*
Lift at valve intake 488*
exhaust 510*
Ground on 114* lobe centres
Posted: Fri Aug 30, 2013 9:29 am
by kiwicar
Hi
Where did that come from? it looks a very usefull profile! Perry what do you want for Chrstmas?
Best regards
Mike
Posted: Fri Aug 30, 2013 2:14 pm
by mgbv8
I'll have one of those cams if it makes me go quicker Santa
Posted: Thu Sep 05, 2013 10:01 am
by daxtojeiro
Hi all,
spoke to Dell at Kent Cams today, very helpful guy and took time to go over what I wanted too!.
Anyhow, Ive ordered:
Inlet 220 - Exh 225 (at 50 tho)
Inlet lift 0.47"
Ex Lift 0.485"
Lobe Seperation 114
He said that the specs looked good for my engine, so thanks for all your help, hopefully this is the last peice of the jigsaw!!
Phil