NOS Jets

General Chat About Nitrous Oxide.

Moderator: phpBB2 - Administrators

Post Reply
ian.stewart
Forum Contributor
Forum Contributor
Posts: 2419
Joined: Sat Nov 18, 2006 1:59 pm
Location: Far Far south, any further south and my feet are wet

NOS Jets

Post by ian.stewart »

Who is the best people in the UK to get NOS fogger spares from, or is it better to direct to the US,
Me thinks im going to need a few to set up what I want, 16 jets per tune, so 3 sets of jets, Im going to contact NOS to get a rough idea of what I want, or is there a ready-reconer for jet sizes??


THE SMOKING GNU
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????

kev_the_mole
Forum Contributor
Forum Contributor
Posts: 1022
Joined: Sat Nov 18, 2006 9:41 pm
Location: Las Islas Purbequias

Post by kev_the_mole »

Many people recommend Wizards of NOS but if you've got any US stuff Trevor there will tell you it's sh1t. I sent him a picture of my IDA manifold with the 'stealth' NOS setup two weeks ago and he's still not got back to me. Probably laughing himself silly.
Image


It's an engine Jim.....but not as we know it ;)

User avatar
bones
Forum Contributor
Forum Contributor
Posts: 1551
Joined: Wed Nov 22, 2006 10:08 am
Location: essex

Post by bones »

there are a few sites that do jet charts, http://www.angelfire.com/fl4/pontiacdud ... lator.html . :) rich

gelmonkey
Sergeant Monkey Face
Posts: 1307
Joined: Sat Jun 27, 2009 11:58 am
Location: plymouth

Post by gelmonkey »

Ian
Try Earls direct.
They have all of the NOS stock on the shelf.
Cheers
P

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

There is a good nitrous jet chart on the NOS site Ian.

The wizards jets wont fit foggers anyway. Real Steel do NOS stuff as well.

Kev / Ian... Trever is packing his bags to go to the USA to roll out the Wizards Revo system on a pro mod car in Atlanta. You wont get any sense out of him while he's on this mission :)

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

ian.stewart
Forum Contributor
Forum Contributor
Posts: 2419
Joined: Sat Nov 18, 2006 1:59 pm
Location: Far Far south, any further south and my feet are wet

Post by ian.stewart »

Cheers Perry, I looked on the NoS site and never found it,obviously not looking hard enough, fuel pressure needs to be 7psi
http://www.holley.com/data/TechService/ ... MATION.pdf
THE SMOKING GNU
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????

stevieturbo
Forum Contributor
Forum Contributor
Posts: 3979
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Post by stevieturbo »

Dont Real Steel do NOS ??


If Earls do it, I'm sure they'll offer excellent service.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

Yes Stevie!
Real Steel are NOS agents. Its where I bought all my first nitrous stuff from.

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

Post Reply

Return to “Nitrous Oxide Area ”