Hi All,
Never ending saga!
RV8 3.5, one core plug leaking, now removed and replaced with another, still leaking. Do I use a socket that's smaller than the plug and drift the centre of the plug into place, or do I use a socket that's the same diameter as the plug?
Which is the best plug sealant out of:
Hylotyte Red
Hylomar blue
Dirko HT red ?
All three can gap seal, are high temp and are resistant to anti-freeze
RV8 core plugs and sealant
Moderator: phpBB2 - Administrators
-
- Helpful or Confused
- Posts: 88
- Joined: Sun Jul 22, 2007 11:51 am
I've tried all sorts of ways. I usually try to rotate the plug by bashing one side, then pulling it. Some of them I've just bashed into the insides first before rotating. Not sure there's a right or wrong way.....
No experience of those 3 sealants you are suggesting.
Chris.
No experience of those 3 sealants you are suggesting.
Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
-
- Top Dog
- Posts: 1278
- Joined: Mon May 04, 2009 6:53 am
-
- Helpful or Confused
- Posts: 88
- Joined: Sun Jul 22, 2007 11:51 am