Page 2 of 2
Posted: Fri Jan 05, 2007 10:35 am
by Wee_chris
Hi Kadettv8,
are you going to take the stuff from ebay, if not I will, thought I would be a gentleman and let you have first chance.
http://cgi.ebay.co.uk/MGB-Rover-V8-Shor ... 0073839829
Cheers
Chris
Posted: Fri Jan 05, 2007 3:35 pm
by katanaman
thats nothing like my p6 crank pulley. my one has the V for the belt cut into the damper itself and not bolted on steel pulleys although it did have one bolted onto the front of it. I think those parts are mixed up with later parts
Posted: Fri Jan 05, 2007 4:56 pm
by KadettV8
you can buy it. i don't need it jet. i need it in a couple of month's. first i have to put the engine in right.
but thanks for asking.
Posted: Mon Jan 08, 2007 10:38 pm
by Mark
I had a P6 front pully but threw it away because the rubber part that holds the damper ring on was perished due to age. I just machined a 'V' groove into the SD1 pully as it was in much better condition, any engineer with a lathe could do this for £20.
Mark