axle tramping

General Chat About Brakes & Suspension

Moderator: phpBB2 - Administrators

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

Slapper bars are easy to make to bolt under leaf springs. I just had to buy slightly longer U bolts :)
This is a vid from back in the day. But you can see the slapper bar on the passenger side doing its stuff.



Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

dave350v8
Helpful or Confused
Helpful or Confused
Posts: 93
Joined: Sat Dec 23, 2006 10:24 pm

Post by dave350v8 »

That's impressive launching hard like that !!

If my 60 foot is around 2.5secs, if I got that down to 1.5secs does that make much difference on et and trap speed?

Post Reply

Return to “Brakes & Suspension Area”