SD1 VDP EFI rear springs colour code.

General Chat About Brakes & Suspension

Moderator: phpBB2 - Administrators

Post Reply
DaveEFI
Gold Member
Gold Member
Posts: 4603
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

SD1 VDP EFI rear springs colour code.

Post by DaveEFI »

Has anyone got a set of these lying around and can check the colour code? Just to be clear, there are a variety of different rear springs fitted to the various models, and the VDP EFI is 'standard' height with progressive rate rear springs and Nivomats as standard. The factory fiche is clearly wrong about this model, as it was the last variant produced and may not have been updated properly.
It is a quite a popular axle for some projects as it has the tallest final drive ratio of all SD1s, shared with only the auto Vitesse. But obviously different suspension.


Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y

Post Reply

Return to “Brakes & Suspension Area”