Good source for brake bits:P6 3500 mongrel from 2000TC

General Chat About Brakes & Suspension

Moderator: phpBB2 - Administrators

Post Reply
P6B Mongrel
Newbie
Newbie
Posts: 3
Joined: Tue Sep 24, 2019 12:18 am

Good source for brake bits:P6 3500 mongrel from 2000TC

Post by P6B Mongrel » Tue Sep 24, 2019 1:18 am

I’d greatly appreciate suggestions for brake rebuild kits, perhaps master & slave cyl., calipers, etc. I’m just starting on a just acquired ‘67 2000TC that was modified with a V8 and 5 speed many years ago. I think the 3-piston front calipers were not original to a TC: any suggested vendors or courses of action? I have a J Taylor manual ordered. I’m in very rural far-northern California. I don’t even know exactly what engine I have yet, but will know soon.
Thanks for any time responding. I welcome any and all direction & input.



unstable load
Top Dog
Top Dog
Posts: 1227
Joined: Mon May 04, 2009 6:53 am

Re: Good source for brake bits:P6 3500 mongrel from 2000TC

Post by unstable load » Thu Oct 17, 2019 11:43 pm

Cheers,
John

harvey
Knows His Stuff
Knows His Stuff
Posts: 418
Joined: Fri Feb 13, 2009 3:43 pm

Re: Good source for brake bits:P6 3500 mongrel from 2000TC

Post by harvey » Fri Oct 18, 2019 12:08 pm

P6B Mongrel wrote:
Tue Sep 24, 2019 1:18 am
I think the 3-piston front calipers were not original to a TC: any suggested vendors or courses of action?
They are most likely calipers from the V8 P6, which IIRC are the same as E-Type jag, but readily available from the Rover specialist suppliers. Rear calipers are the same across all models apart from really early cars with a Dunlop system.

SuperV8
Guru
Guru
Posts: 781
Joined: Tue Jul 07, 2009 11:25 pm
Location: West midlands

Re: Good source for brake bits:P6 3500 mongrel from 2000TC

Post by SuperV8 » Tue Nov 05, 2019 9:25 am

This is a useful resource:
http://www.delphicat.com/WebForms/frmDelphiHome.aspx
Have a look around XJ6 -

Tom.
Dax Rush 4.6 supercharged V8 MSII

Post Reply

Return to “Brakes & Suspension Area”