Question for Mr Monkey

General Chat About Body & Strengthening

Moderator: phpBB2 - Administrators

Post Reply
User avatar
Ian Anderson
Forum Contributor
Forum Contributor
Posts: 2396
Joined: Sun Nov 19, 2006 9:46 pm
Location: Edinburgh

Question for Mr Monkey

Post by Ian Anderson »

Hi Paul

This was just asked over at GT40 site

Anything you would care to divulge!

Cheers
Ian

What to use to remove plasticine /wax post popping the body out

What is the best thing to use to remove this stuff, have tried turps, metho, acetone, sugar soap

Any ideas?


Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.

gelmonkey
Sergeant Monkey Face
Posts: 1307
Joined: Sat Jun 27, 2009 11:58 am
Location: plymouth

Post by gelmonkey »

Hi Ian
Remove excess plasticene with a body filler spreader first then wipe off residue with a well soaked acetone rag
Works every time
Cheers
P

User avatar
Ian Anderson
Forum Contributor
Forum Contributor
Posts: 2396
Joined: Sun Nov 19, 2006 9:46 pm
Location: Edinburgh

Post by Ian Anderson »

Cheers Paul

I will pass that on

Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.

gelmonkey
Sergeant Monkey Face
Posts: 1307
Joined: Sat Jun 27, 2009 11:58 am
Location: plymouth

Post by gelmonkey »

My pleasure mate
Will always try to help if I can
If anything else needed just ask
Cheers

Post Reply

Return to “Body & Strengthening”