Shaved door handles - safety issue?

General Chat About Body & Strengthening

Moderator: phpBB2 - Administrators

Post Reply
Stuball
Forum Contributor
Forum Contributor
Posts: 187
Joined: Fri Nov 17, 2006 11:46 pm
Location: Huntingdon, Cambs

Shaved door handles - safety issue?

Post by Stuball »

Hi all,

Ok, so this year I want to start drag racing my astro van.

One issue I have is that the door handles have been removed and the door smoothed over. Doors are opened electronically by a solenoid that pops the latch (button on outside although hidden)

Im probably about to answer my own question, but is this going to be a safety concern?, Likely to get turned away at the track?

If it is ill have to start making changes quick sharp.

cheers!!

Stu



unstable load
Top Dog
Top Dog
Posts: 1278
Joined: Mon May 04, 2009 6:53 am

Re: Shaved door handles - safety issue?

Post by unstable load »

Stuball wrote:If it is ill have to start making changes quick sharp.

cheers!!

Stu
I'd get cracking if I were you.
I can't see the scrutineers letting that one slip past.
Cheers,
John

Stuball
Forum Contributor
Forum Contributor
Posts: 187
Joined: Fri Nov 17, 2006 11:46 pm
Location: Huntingdon, Cambs

Post by Stuball »

Thought as much....

Best break out the grinder :(

STU

User avatar
JSF55
Forum Contributor
Forum Contributor
Posts: 991
Joined: Mon Dec 04, 2006 4:15 pm
Location: Swansea
Contact:

Post by JSF55 »

Wouldn't entertain it theese days unless it was on lowrider stu ! have a look how lawrence did the vauxhall ones on his truck it might help ?
www.project55.co.uk
So thats where it went !

Stuball
Forum Contributor
Forum Contributor
Posts: 187
Joined: Fri Nov 17, 2006 11:46 pm
Location: Huntingdon, Cambs

Post by Stuball »

Cheers for that.

Had a quick look at various handles/locks, seems that vauxhall corsa ones
may do the job.

thanks

Stu

dnb
Knows His Stuff
Knows His Stuff
Posts: 405
Joined: Thu Mar 29, 2007 12:20 pm

Post by dnb »

A related question: What if the doors came out of the factory with solenoids and no handles (thinking TVR here)?

I know there are manual releases inside the car, but that doesn't really help people outside get in if there's a problem.

kiwicar
Forum Contributor
Forum Contributor
Posts: 5461
Joined: Sat Nov 18, 2006 5:00 pm
Location: Milton Keynes

Post by kiwicar »

Hi
Having just had an MOT failure on a broken rear door mechanism (and had to do without the car for a week while it was fixed) on the MOT jargon version of car "cannot be accessed from outside by door handle", or words to that effect I am suprised that you chaps are getting through the MOT let alone passed scrutineering. I appreciate the TVR is a special case and will have been type aproved like that but so it is difficult to fail it now but I still do not see how it can pass and mine fail :?
Best regards
Mike
poppet valves rule!

Stuball
Forum Contributor
Forum Contributor
Posts: 187
Joined: Fri Nov 17, 2006 11:46 pm
Location: Huntingdon, Cambs

Post by Stuball »

Regards MOT, although it doesnt have handles, both front doors on my van can still be opened from outside and inside using "the relevant control" (quote from the MOT manual), which is why it passes. Probably how TVR get round it too.

Never raced the van before which is why i brought it up. Ah well, on with the modifications :D

Stu

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

You certainly wont get turned away from Santapod Stu...

I doubt North Weald and York will be concerned either..

Santapod do not scrutineer any vehicles for RWYB.

The other two sites only check for secure batteries, wheel nuts all in place, dual throittle return springs and seat belts etc..

At Santapod all you need to do to run is NOT be dripping fluids on the start line and not be driving a vehicle that looks obviously like it should not be driven at all because it looks like a wreck.

If you were running the vehicle in a specific race class at any track then there would be guidelines that you would need to adhere to.

But for RWYB there really arent any vehicle spec rules. Dont waste your time altering what you have just for a few race days mate. You wont get turned away from anywhere for RWYB :)

Perry

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

Stuball
Forum Contributor
Forum Contributor
Posts: 187
Joined: Fri Nov 17, 2006 11:46 pm
Location: Huntingdon, Cambs

Post by Stuball »

Cheers for that perry.

Should have been a bit more specific and said it would be RWYB (rather than in a class as you said)

Though i think im still gonna change it to a mechanical release of some sort rather than electrical.

Regards

Stu

Post Reply

Return to “Body & Strengthening”