Page 1 of 1
Hello
Posted: Thu May 11, 2017 10:48 am
by Neilr
Just thought I say hi I have a 71 Rover 3500 P6. Have done quite a bit of work to it recently but still it doesn't run right. Hope someone on hear can help. Neil
Posted: Thu May 11, 2017 4:26 pm
by scudderfish
Hello! Photos, and a description of your problem(s)?
Regards,
David
Posted: Thu May 11, 2017 7:34 pm
by Neilr
scudderfish wrote:Hello! Photos, and a description of your problem(s)?
Regards,
David
Problem is wont run without choke. Have so far rebuilt carbs and fuel pump changed cam followers and timing chain. Tried electronic ignition. And its still the same.
Posted: Thu May 11, 2017 8:01 pm
by Rossco
Hi and welcome to the mad house
If the followers were worn then the cam will also be worn, Rover V8's are notorious for cam wear.
Rossco
Posted: Fri May 12, 2017 7:29 am
by Neilr
Rossco wrote:Hi and welcome to the mad house
If the followers were worn then the cam will also be worn, Rover V8's are notorious for cam wear.
Rossco
The worn cam was replaced with a new 3.9 cam from V8Tuner.