LS1 Minor
Moderator: phpBB2 - Administrators
OOOSH!!!
That does it for me
You need to get that thing on display at this years NEC classic car gig for sure.
I may have the MGB there again this year?
Do you belong to an nowners club that has a stand at the NEC Classic Cars Show??
That thing deserves to be shown to the public mate.
Big Respect
Perry
That does it for me
You need to get that thing on display at this years NEC classic car gig for sure.
I may have the MGB there again this year?
Do you belong to an nowners club that has a stand at the NEC Classic Cars Show??
That thing deserves to be shown to the public mate.
Big Respect
Perry
Perry Stephenson
MGB GT + Rover V8
9.62 @ 137.37mph
Now looking for 8 seconds with a SBC engine
-
- Getting There
- Posts: 253
- Joined: Sat Nov 18, 2006 4:23 pm
- Location: Broughty Ferry
- Contact:
I'm a member of the Morris Minor Owners forum and it will hopefully be at their first event where we will be joining the Harrogate MGOC on 3rd and 4th August 2013
Nidderdale Show Ground,
Bewerley Park
Plateley Bridge (Nr Harrogate)
Yorkshire
I'll also be taking it to Crail Raceway and attending the summer (if we get one) hot rod runs in Scotland.
Pete
Nidderdale Show Ground,
Bewerley Park
Plateley Bridge (Nr Harrogate)
Yorkshire
I'll also be taking it to Crail Raceway and attending the summer (if we get one) hot rod runs in Scotland.
Pete
-
- Getting There
- Posts: 253
- Joined: Sat Nov 18, 2006 4:23 pm
- Location: Broughty Ferry
- Contact:
-
- Forum Contributor
- Posts: 3979
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
-
- Getting There
- Posts: 253
- Joined: Sat Nov 18, 2006 4:23 pm
- Location: Broughty Ferry
- Contact:
Here's the best place to find out the current legislation regardiing modded vehicles:
http://www.the-ace.org.uk/
Perhaps also have a look here to get sensible answers:
http://www.rodsnsods.co.uk/forum/
http://www.nsra.org.uk/newforum/forum.php
Is your car currently registered, or is it a new build.
Pete
http://www.the-ace.org.uk/
Perhaps also have a look here to get sensible answers:
http://www.rodsnsods.co.uk/forum/
http://www.nsra.org.uk/newforum/forum.php
Is your car currently registered, or is it a new build.
Pete
Thanks, I will look at the sites.
I have not built a car in years, and do not want to start something that can not be put back on the road because of dvla rules, so I am asking questions before I start.
I am happy, ish, for them to want to make sure the car is safe, I say ish because I am not a lover of jobsworths with beards and pipes having had to deal with them during various SVA inspections.
But I have no idea what will be involved when the engine, box and front and back axles are changed and the bulkhead has been cut. Will they want the car to pass 2013 standards? Such as ABS, ESP and airbags etc.
I have not built a car in years, and do not want to start something that can not be put back on the road because of dvla rules, so I am asking questions before I start.
I am happy, ish, for them to want to make sure the car is safe, I say ish because I am not a lover of jobsworths with beards and pipes having had to deal with them during various SVA inspections.
But I have no idea what will be involved when the engine, box and front and back axles are changed and the bulkhead has been cut. Will they want the car to pass 2013 standards? Such as ABS, ESP and airbags etc.
Mark
Direct link to a PDF on the dvla site
http://www.google.co.uk/url?sa=t&rct=j& ... 2109,d.ZWU
http://www.google.co.uk/url?sa=t&rct=j& ... 2109,d.ZWU
So thats where it went !
thanks for link, I had read it just before you posted it, it does not tell me what happens after they have decided the car will need testing apart from it needs a test.
I will email dvla and see if they will answer my questions. I did email vosa and they say its dvla who in tern say its a vosa thing, so who knows.
I will email dvla and see if they will answer my questions. I did email vosa and they say its dvla who in tern say its a vosa thing, so who knows.
Mark
Called into a VOSA test station today and spoke to an inspector. Roughly speaking he said that as the car will have no year of manufacture DVLA will make a decision and from there it will have to be tested on that basis.
He said he couldn't even guess what DVLA would say but the shell even if it is unmodified to the outside would be "radius tested" for example. So a gap or curve that was OK in say 1965 might not be today. Also said things like front panels have to go under the car by 90 degrees. Not sure exactly what that means but I can guess. ABS and bags would not be needed.
So if you were making a 1965 Morris Minor Gasser style car I think they would have a baby over the front end being up in the air and no bumpers etc.
Engine year would dictate emissions requirements so that's easy.
Steering, if for example a Sierra column was used and assuming it was properly fitted they would test it as a Sierra item, so that's fair too.
Brakes would have to be tested but he guessed they would work out weights etc, so if they work properly (and who would not want them to?) that should also be OK.
Paperwork would be needed to prove what car and the year the parts came from. He gave me a name to speak to, that's my next call...
He said he couldn't even guess what DVLA would say but the shell even if it is unmodified to the outside would be "radius tested" for example. So a gap or curve that was OK in say 1965 might not be today. Also said things like front panels have to go under the car by 90 degrees. Not sure exactly what that means but I can guess. ABS and bags would not be needed.
So if you were making a 1965 Morris Minor Gasser style car I think they would have a baby over the front end being up in the air and no bumpers etc.
Engine year would dictate emissions requirements so that's easy.
Steering, if for example a Sierra column was used and assuming it was properly fitted they would test it as a Sierra item, so that's fair too.
Brakes would have to be tested but he guessed they would work out weights etc, so if they work properly (and who would not want them to?) that should also be OK.
Paperwork would be needed to prove what car and the year the parts came from. He gave me a name to speak to, that's my next call...
Mark
-
- Getting There
- Posts: 253
- Joined: Sat Nov 18, 2006 4:23 pm
- Location: Broughty Ferry
- Contact:
I wanted to do a Morris Minor in a Gasser style, but if I do it the way DVLA want it will be very hard/impossible.
So I will keep looking and hope to find something already registered, as you suggest, so open to anything that takes my fancy really, but maybe I will buy a Minor and just do it little by little and maybe the gestapo will not notice.
So I will keep looking and hope to find something already registered, as you suggest, so open to anything that takes my fancy really, but maybe I will buy a Minor and just do it little by little and maybe the gestapo will not notice.
Mark
-
- Getting There
- Posts: 253
- Joined: Sat Nov 18, 2006 4:23 pm
- Location: Broughty Ferry
- Contact:
Join up here for all things Morris Minor - from mild to wild:
http://mog.myfreeforum.org/index.php?si ... a0a6824b62
There are many ways to skin a cat
Pete
http://mog.myfreeforum.org/index.php?si ... a0a6824b62
There are many ways to skin a cat
Pete