Page 1 of 1
rover to 700R4 gearbox
Posted: Sun Feb 28, 2016 4:52 pm
by andyv8van
Hi guys
anyone fitted 700r4 box to rover V8? any drawings of adapter kit available?
regards
Andy
Posted: Mon Feb 29, 2016 8:14 pm
by Eliot
Box is the very similar to a TH350 which Perry has dabbled with such - even had a spare adapter at some point iirc
Not sure what power you are running, but they need work to make them last if you are putting a moderate amount of torque alongside good grip.
This is the build I did myself which after fitting the z-pack, has now lasted quite a few years:
http://www.mez.co.uk/chevy700r4pg3-new.html
I and others have encountered problems with so-called "specialists", so be careful where you spend your money, it's all on my site if you want to read it.
Posted: Sat Mar 05, 2016 7:33 pm
by andyv8van
Hi eliot
yes fitted th350 in mini with an adapter, but was hoping to get a better machined unit, if you have a drawing as i dont have one from my adapter work.
i have a friend who could machine one for me if i can get drawings
i have a guy sorted for gearbox rebuild , £2500 for upgrade and rebuild
Andy