1984 Ford Capri 1.6 Laser to V8 Conversion Help.....

Post any info regarding parts for conversion and swaps.
and any posts regarding swaps help.

Moderator: phpBB2 - Administrators

User avatar
Darkspeed
Guru
Guru
Posts: 913
Joined: Sun Sep 02, 2007 4:43 pm
Location: Shropshire
Contact:

Post by Darkspeed »

Google it.

Looks like truck engine - will weigh as much as the car - develop less power than a 3.5 rover and be a small fortune to get all the parts to make it run correctly .
JonnyEnglish wrote:
JonnyEnglish wrote:What are these like? Does it matter that they don't have carbs?? http://ebay.us/rqANVx
Anyone have any information on these, what there like to install, run what power they make etc?

thanks

Jon


4.5L V8 Ginetta G27

volospian
Forum Contributor
Forum Contributor
Posts: 277
Joined: Sun Jan 13, 2008 7:51 pm
Location: Northamptonshire

Post by volospian »

stevieturbo wrote:IMO track down a 5.3 LS engine and stick either a good T5 behind it, or just fit the T56

If you've a few more quid, then go with the 6.0 etc versions.
Agreed, although I'd fit a getrag 265.... or should i say "I did fit a getrag 265" :)

Rich

stevieturbo
Forum Contributor
Forum Contributor
Posts: 3979
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Post by stevieturbo »

What sort of budget are you aiming for ?
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

JonnyEnglish
Newbie
Newbie
Posts: 27
Joined: Mon Oct 19, 2015 12:40 pm

Post by JonnyEnglish »

I don't have a budget as such I am completely restoring the car and going to be starting the resto in the next month or so. as for budget I am going to be doing it slowly over a year or 2 (more likely 2). I will be removing most panels and the current engine (2ltr pinto) and would like a v8 would like to get a crate engine but they seem pretty expensive... ideally on just the engine I wouldn't like to spend more than £1000 but if there was something really good I may spend a bit more. I would imagine that the complete restoration will set me back in the region of £8000-£10,000 but I will be doing 100% of the work myself just though it would be best to get everything in the engine bay fitted and ready before tackling the bodywork as no doubt id paint it and then scratch it or something. in an ideal world i would like a ford 302 engine as that seems the best option just really struggling to find any!

Thanks Guys

Jon

JonnyEnglish
Newbie
Newbie
Posts: 27
Joined: Mon Oct 19, 2015 12:40 pm

Post by JonnyEnglish »

Sorry also forgot to say that whatever engine I get (unless I end up with a crate engine or the like) it will be 100% stripped down and rebuilt at the same it will be modified as necessary this probably goes without saying though.. thanks again

stevieturbo
Forum Contributor
Forum Contributor
Posts: 3979
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Post by stevieturbo »

Some of the old GM engines seem cheap as a crate, no ancillaries etc though which would bump prices up.

http://www.roadcraftuk.co.uk/index.php? ... uct_id=581

Some of PWP's kits arent bad either

http://www.partsworldperformance.com/35 ... deluxe-kit

I really cant see you getting much sub £1k though, and then you've transmission on top.

I know it's more money, and some guys have posted much cheaper engines/boxes from Aussie breakers, but these still arent terrible value. And you know you're getting a great engine with lots of potential and parts will be readily available for a very long time.

http://www.ebay.co.uk/itm/2001-Trans-Am ... Sw5ZBWKVcK

And as a cutout from another car, you really should ahve almost all parts needed without spending weeks or months hunting down and buying individually.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

JonnyEnglish
Newbie
Newbie
Posts: 27
Joined: Mon Oct 19, 2015 12:40 pm

Post by JonnyEnglish »

Man I wish I was richer they all look so nice! does anyone know of a company that sell crate engines on finance? that would be awesome! does anyone know what a 2.0 ltr pinto sells for? got a few bits that I will sell as I remove them! like the look of the roadcraft stuff they seem pretty cheap!

stevieturbo
Forum Contributor
Forum Contributor
Posts: 3979
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Post by stevieturbo »

Roadcraft prices are plus VAT...why they dont state this is beyond me. So they arent as cheap as they first appear. Prices will be similar to PWP etc.

And they all do finance when you use credit cards lol

IMO the only way you'll get a complete V8 engine and drivetrain for anything near £1k, is by finding and buying a complete car of some sort.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

JonnyEnglish
Newbie
Newbie
Posts: 27
Joined: Mon Oct 19, 2015 12:40 pm

Post by JonnyEnglish »

Just spoken to a guy up the road from me who has offered me a ford 302 v8 with a c4 auto box and a carburettor (not sure what carb) for £500 he says the engine runs perfect but the gearbox has never been used or fitted so is unsure of the condition but he bought it as working?! seems like a good deal to me! what could I sell the box for as im not really looking for an auto?

stevieturbo
Forum Contributor
Forum Contributor
Posts: 3979
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Post by stevieturbo »

JonnyEnglish wrote:Just spoken to a guy up the road from me who has offered me a ford 302 v8 with a c4 auto box and a carburettor (not sure what carb) for £500 he says the engine runs perfect but the gearbox has never been used or fitted so is unsure of the condition but he bought it as working?! seems like a good deal to me! what could I sell the box for as im not really looking for an auto?
Certainly sounds like a solid base to work from. Should be easy enough to source a T5 box from the US for something like that

But if it's a working engine, with all ancillaries, then go for it
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

JonnyEnglish
Newbie
Newbie
Posts: 27
Joined: Mon Oct 19, 2015 12:40 pm

Post by JonnyEnglish »

Ok so it looks like I'm going to be getting the 302!! Really happy going to be getting some photos of it tomorrow and going to see it on Saturday can't wait! Don't know what you guys think but what I am thinking of doing is..... Fitting the 302 with a t9 gearbox, custom prop, and a mustang rear axle. Is there anything I've missed (not including ancillary a and stuff)

User avatar
Ian Anderson
Forum Contributor
Forum Contributor
Posts: 2396
Joined: Sun Nov 19, 2006 9:46 pm
Location: Edinburgh

Post by Ian Anderson »

Better brakes!

Keep it safe

Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.

JonnyEnglish
Newbie
Newbie
Posts: 27
Joined: Mon Oct 19, 2015 12:40 pm

Post by JonnyEnglish »

Yea good point! its going to have a rear disc conversion as well as new suspension all round so should be ok! i hope

stevieturbo
Forum Contributor
Forum Contributor
Posts: 3979
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Post by stevieturbo »

Cant see a huge need to replace the rear axle, although it will certainly do no harm, other than adding a bit of weight.

I doubt most 302's are huge powerhouses

Certainly I'd think the T9 will be a much weaker link than the rear axle would be.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

JonnyEnglish
Newbie
Newbie
Posts: 27
Joined: Mon Oct 19, 2015 12:40 pm

Post by JonnyEnglish »

mAYBE I WONT USE A TYPE 9 ARE THE MT75'S BETTER ? IS THE T5 THE ONE THAT IS IN THE TRANSIT? LIKE THIS?

ebay

THERE AROUND THE SAME PRICE SO NO ODDS AS TO WHICH ONE I USE I SPOSE?! APOLOGISE FOR CAPS LOOK DIDNT REALISE!

Thanks

Jon

Post Reply

Return to “Engine Swaps And Conversions Area”