Finally a good dyno result for my Griff
Posted: Sun Aug 02, 2009 8:58 pm
Headline figures are 319.5 bhp @ 5700 and 349 ftlbs @ 4000 at the flywheel.
Will post the proper graphs when I can scan them, meanwhile here's an excel copy.
All in all, not a bad result. The engine looks to be timing limited by det prevention measures (timing retarded due to intake temp etc) above 5k, but that's no real surprise because it's high compression and 95 RON.
The fuelling looked spot on.
Will post the proper graphs when I can scan them, meanwhile here's an excel copy.
All in all, not a bad result. The engine looks to be timing limited by det prevention measures (timing retarded due to intake temp etc) above 5k, but that's no real surprise because it's high compression and 95 RON.
The fuelling looked spot on.