Rolling road day in Bletchley / Milton keynes

For V8 Forum Members only, Please list rolling road & dyno posts in here please

Moderator: phpBB2 - Administrators

Coops
Site Admin
Site Admin
Posts: 6317
Joined: Fri Nov 17, 2006 7:43 pm
Location: Newbury, Berks
Contact:

Post by Coops »

well its 6am and just about to please the neighbours by firing the cappa up in the garage to get her sorted for the trip to the rolling road,
see you all soon, :wink:


Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts. :D
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk

davidbb
Newbie
Newbie
Posts: 2
Joined: Thu Mar 06, 2008 6:47 pm

Post by davidbb »

I would like to say a big thank you to Perry for oganising the day! And i was sorry that i didn`t get to say good bye to him and martin

It was great meeting everyone and seeing a face to everyones user names i know that i don`t post on here but i always read everyones advise

It was good to see a varied selection of vehicles too

Now at home it looks like its time to raid the piggy bank to get the landy running better and some more power

Thanks again for a great day and i`ll be looking forward to seeing everyone again

David

User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5039
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

:whs

I get the wooden spoon for the making the least power! 135BHP on petrol, and about 98BHP on LPG.

Must pedal harder next time.

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8

User avatar
Eliot
Top Dog
Top Dog
Posts: 1765
Joined: Sat Nov 18, 2006 9:46 am
Location: Milton Keynes
Contact:

Post by Eliot »

Yes - great day out. Put my graph and a couple of photos up:
http://www.mez.co.uk/turbo16.html

Although its not quite right, because it stops at 4200, whereas the datalog had it at 4700, either way - its better than the last time so i'm pleased. :D
Eliot Mansfield
5.7 Dakar 4x4, 4.6 P38 & L322 TDV8
www.mez.co.uk / www.efilive.co.uk

Stuball
Forum Contributor
Forum Contributor
Posts: 187
Joined: Fri Nov 17, 2006 11:46 pm
Location: Huntingdon, Cambs

Post by Stuball »

Was a great day, great selection of vehicles too :D

These are the 2 graphs for my 3.5 Capri.


Image


And after a bit of WOT re-mapping

Image


Hope theres another one next year :twisted:

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

Hiya Boy's !!!!
Despite me leaving Martins place ages ago, I'm only just in. Had to do some payback and take Gill to Tesco's as soon as I pulled up outside..

I'll do more words when I've got a moment, but now its time to put our info up when we can so I can get started on an article for British V8 and Retro Cars mag to see if I can get us in print.

You can just copy and paste the results table from below to suit your cars. That is EFI, nasp and one for Chris who will have two tables to post up in eh mate! And one for me with my nitrous table.

Thankyou all so much for turning up to take part today. What a great bunch we are eh!!
This is only my second dyno day, and I prefer doing it this way with all different cars rather than marque specific like I did last time.
I hope you were happy with the food, beverage and payment arrangments??
Regards
Perry (MGBV8)

SO, HERE WE GO.......


V8 Owners Forum Dyno day August 2008
Results table

EFI TABLE
Name:
Car:
Corrected Engine Power:
Engine Power:
Wheel Power:
Drag Power:
Max power @ RPM:
Max attained RPM:


NORMALLY ASPIRATED TABLE:
Name:
Car:
Corrected Engine Power:
Engine Power:
Wheel Power:
Drag Power:
Max power @ RPM:
Max attained RPM:


LPG TABLE
Name:
Car:
Corrected Engine Power:
Engine Power:
Wheel Power:
Drag Power:
Max power @ RPM:
Max attained RPM:

NITROUS TABLE
Name:
Car:
Corrected Engine Power:
Engine Power:
Wheel Power:
Drag Power:
Max power @ RPM:
Max attained RPM:
Amount of Nitrous used:
Nitrous pressure:
Fuel pressure:
Nitrous System type / make:
Ignition retard setting:
Cups of Tea consumed:..........11
Cups of Coffee consumed: 3
Amount of Burgers consumed:......2
Fat Bastard rating out of 10:.....7.9

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

Jeez Eliot...
Torque Monster or what :shock:
Nearly 500 ft/lbs...

That thing of yours could climb better than Spiderman :D 8) :D

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

Stuball
Forum Contributor
Forum Contributor
Posts: 187
Joined: Fri Nov 17, 2006 11:46 pm
Location: Huntingdon, Cambs

Post by Stuball »

EFI TABLE
Name:Stuart Harrison
Car:Ford Capri V8
Corrected Engine Power:191.3bhp
Engine Power:188.2bhp
Wheel Power:146.4bhp
Drag Power:41.8bhp
Max power @ RPM:5470
Torque:198.4lbft
Max torque @ RPM:4580
Max attained RPM:5705
Last edited by Stuball on Sat Aug 23, 2008 7:36 pm, edited 1 time in total.

User avatar
Ian Anderson
Forum Contributor
Forum Contributor
Posts: 2396
Joined: Sun Nov 19, 2006 9:46 pm
Location: Edinburgh

Post by Ian Anderson »

V8 Owners Forum Dyno day August 2008
Results table

EFI TABLE
Name: Ian Anderson
Car: Dax GT40
Corrected Engine Power: 233.1bhp
Engine Power: 231.5 bhp
Wheel Power:179.6 bhp
Drag Power:51.8 bhp
Max power @ RPM:6240rpm
Max attained RPM:6520rpm
Max Torque 227.4 lbf.ft at 4575rpm



Cups of Tea consumed:..........0
Cups of Coffee consumed: 2
Amount of Burgers consumed:......1
And I beat Perry on the Fat Bartard league (Well I did before losing 6 stone this year (so far))

And I must ay a big thank you for organising the event and so I can put names and faces together

Brilliant time but I think my motor must have travelled Via Shetland as JE Did the Dyno on the motor and got bigger numbers - perhaps I should unblock the exhaust!

Only one complaint - you never organised the traffic to be light for the trip home 54 miles and 2.5 hours the M25 was buggered big time. That said the water temp stayed good with the fan on manual so hopefully the water that came out on the dyno was only from the overflow or a bit of a burp wth a bubble.

Thanks again
Ian
Last edited by Ian Anderson on Sun Aug 24, 2008 8:49 am, edited 1 time in total.
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

Hang on chaps!!!

Lets try that agin with the torque figures shall we. SORRY!!

V8 Owners Forum Dyno day August 2008
Results table

EFI TABLE
Name:
Car:
Corrected Engine Power:
Engine Power:
Wheel Power:
Drag Power:
Max power @ RPM:
Torque:
Max torque @ RPM:
Max attained RPM:


NORMALLY ASPIRATED TABLE:
Name:
Car:
Corrected Engine Power:
Engine Power:
Wheel Power:
Drag Power:
Max power @ RPM:
Torque:
Max torque @ RPM:
Max attained RPM:


LPG TABLE
Name:
Car:
Corrected Engine Power:
Engine Power:
Wheel Power:
Drag Power:
Max power @ RPM:
Torque:
Max torque @ RPM:
Max attained RPM:

NITROUS TABLE
Name:
Car:
Corrected Engine Power:
Engine Power:
Wheel Power:
Drag Power:
Max power @ RPM:
Torque:
Max torque @ RPM:
Max attained RPM:
Amount of Nitrous used:
Nitrous pressure:
Fuel pressure:
Nitrous System type / make:
Ignition retard setting:
Cups of Tea consumed:..........11
Cups of Coffee consumed: 3
Amount of Burgers consumed:......2
Fat Bastard rating out of 10:.....7.9

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

NORMALLY ASPIRATED TABLE:

Name: Perry Stephenson
Car: MGB GT V8
Corrected Engine Power: 234.7 bhp
Engine Power: 232.9 bhp
Wheel Power: 173.2 bhp
Drag Power: 59.8 bhp
Max power @ RPM: 5385 rpm
Torque: 310.9
Max torque @ RPM: 2795 rpm
Max attained RPM: 5665 rpm

NITROUS TABLE

Name: Perry Stephenson
Car: MGB GT V8
Corrected Engine Power: 325.1 bhp
Engine Power: 321.9 bhp
Wheel Power: 244.8 bhp
Drag Power: 77.1 bhp
Max power @ RPM: 5985 rpm
Torque: 383.4 ft/lbs
Max torque @ RPM: 3975 rpm
Max attained RPM: 6000 rpm
Amount of Nitrous used: 100 bhp
Nitrous pressure: 850 psi
Fuel pressure: 6 psi
Nitrous System type / make: Wizards of Nos
Ignition retard setting: 3 degree's
Cups of Tea consumed:..........11
Cups of Coffee consumed: 3
Amount of Burgers consumed:......2
Fat Bastard rating out of 10:.....7.9


Perry

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

Coops
Site Admin
Site Admin
Posts: 6317
Joined: Fri Nov 17, 2006 7:43 pm
Location: Newbury, Berks
Contact:

Post by Coops »

hope this makes sence,
just come back from my sponsors birthday party and defo shite faced, :lol:

V8 Owners Forum Dyno day August 2008
Results table

EFI TABLE
Name: Tony Cooper
Car: 3.9 capri v8.
Corrected Engine Power: 235.3 bhp
Engine Power: 231.3 bhp
Wheel Power: 180 bhp
Drag Power: 51.3 bhp
Max power @ RPM: 5980 rpm
Torque: 228.4 lbf.ft
Max torque @ RPM: 4400 rpm
Max attained RPM: 6265 rpm

Cups of Tea consumed:..........2
Cups of Coffee consumed: 6
Amount of Burgers consumed:......2
Fat Bastard rating out of 10:.....F@@ked if i know :lol:

May i also say a big thanks to perry for organizing todays dyno,
and it was good to meet the fellow forum members along with there cars,
was good for us all to get together and meet up, looking forward to the next one, fingers crossed she maybe force inducted by then,
Rich did you get home ok with the sd1?
I know Martin don't get to see these forums, but you must admit he was a bloody good chap today, and i highly recomend him,
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts. :D
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk

User avatar
bones
Forum Contributor
Forum Contributor
Posts: 1551
Joined: Wed Nov 22, 2006 10:08 am
Location: essex

Post by bones »

Thanks Perry for organizing it, even with my problems i had a good day and enjoyed meeting everyone, i made it home ,but the fan belt came off again and the oil leak got worse, And thanks all for your help with my poor old rover, maybe next time the sd1 will be ok to do 2 runs :D . Thanks again Perry ,me and my lot enjoyed the hole day :D Rich

Magnetteman
Newbie
Newbie
Posts: 49
Joined: Thu Aug 21, 2008 7:49 pm
Location: Milton Keynes

Post by Magnetteman »

*I know Martin don't get to see these forums, but you must admit he was a bloody good chap today, and i highly recomend him*

That's very kind of you, thank you, and I have to say he enjoyed himself as well as did I. 8)

Ian

Coops
Site Admin
Site Admin
Posts: 6317
Joined: Fri Nov 17, 2006 7:43 pm
Location: Newbury, Berks
Contact:

Post by Coops »

Magnetteman wrote:*I know Martin don't get to see these forums, but you must admit he was a bloody good chap today, and i highly recomend him*

That's very kind of you, thank you, and I have to say he enjoyed himself as well as did I. 8)

Ian
Hi Ian,
glad you and martin enjoyed yourselves we will defo be making a return,

Hey perry i noticed we are quite evenly matched off gas,
maybe we should have a run off gas somewhen at the pod for a giggle mate :lol: .

also mate what details do you want for the mag articles etc, as i can then mail the said members via a mass mail within the forum so we all get the details you want.
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts. :D
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk

Post Reply

Return to “Rolling Roads And Dyno's”