Posted: Sun Mar 16, 2008 10:31 am
has "vixpy" seen the graph? he's usally quite good at spotting dyno errors.
The problems have actually presented themselves now, by the usual method of getting worse so they were noticable in normal driving...
One of the induction hoses was beginning to collapse.
The brake servo diafragm failed (this unbalanced the plenums and made the car untunable at low airflows, but didn't affect it at high load)
HT leads were beginning to disintegrate through heat.
The result was 157 bhp, 330 ftlbs (both at 2400 rpm) and a very dead clutch!