Edis 8 module

If you want to sell it, this is the place for you.

Moderator: phpBB2 - Administrators

Post Reply
texpis
Helpful or Confused
Helpful or Confused
Posts: 112
Joined: Fri Dec 15, 2006 8:07 pm

Edis 8 module

Post by texpis » Thu Jan 31, 2019 3:53 pm

As per title £30 delivered

Mick[attachment=0]80ACB52B-A7D2-46AB-8F6F-137F3A7313A2.jpeg[/attachment
Attachments
80ACB52B-A7D2-46AB-8F6F-137F3A7313A2.jpeg



texpis
Helpful or Confused
Helpful or Confused
Posts: 112
Joined: Fri Dec 15, 2006 8:07 pm

Re: Edis 8 module

Post by texpis » Mon Feb 04, 2019 10:11 am

Offers! or are thes not used anymore.

Mick

DaveEFI
Forum Contributor
Forum Contributor
Posts: 4023
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

Re: Edis 8 module

Post by DaveEFI » Mon Feb 04, 2019 1:30 pm

They don't often go wrong, so not much demand?
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y

User avatar
Ian Anderson
Forum Contributor
Forum Contributor
Posts: 2198
Joined: Sun Nov 19, 2006 9:46 pm
Location: Ashford,

Re: Edis 8 module

Post by Ian Anderson » Mon Feb 04, 2019 5:54 pm

Ok so it runs the spark and is mor controllable

But what else would I need to get it to work?

Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.

User avatar
scudderfish
Site Admin
Site Admin
Posts: 339
Joined: Sat Feb 28, 2009 6:53 pm
Location: Harpenden, Hertfordshire

Re: Edis 8 module

Post by scudderfish » Mon Feb 04, 2019 8:28 pm

Crank position sensor and some way of intelligently changing the timing from 10 degrees limp home mode (such as MS1)

DaveEFI
Forum Contributor
Forum Contributor
Posts: 4023
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

Re: Edis 8 module

Post by DaveEFI » Tue Feb 05, 2019 8:25 am

And a couple of EDIS4 coils. :)
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y

Post Reply

Return to “For Sale”