Need some help if possible,

Day To Day Chat Area, So Forum Topic's Don't Get Spammed Up.

Moderator: phpBB2 - Administrators

Post Reply
Coops
Site Admin
Site Admin
Posts: 6317
Joined: Fri Nov 17, 2006 7:43 pm
Location: Newbury, Berks
Contact:

Need some help if possible,

Post by Coops »

Need some help guys,
Has anyone local to Newbury West Berkshire a manual sd1 flywheel I can borrow for about 15min, to bolt my old clutch to so I can measure the distance from the flywheel face to the clutch fingers when bolted down, or if someone else can measure theres and let me know please,
Its so we can work out the difference between the old clutch and the new twin plate clutch to see if we need to machine the bearing carrier and pivot point to give required clearances/travel,
I would do it myself but my flywheel and new clutch are away being balanced and machined to fit at the moment,

Cheers Tony,


Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts. :D
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk

Post Reply

Return to “General Chat Area”