1982 SD1

What Do You Drive? Tell Us Here.
V8 Only Please,

Moderator: phpBB2 - Administrators

User avatar
ged
Forum Contributor
Forum Contributor
Posts: 668
Joined: Tue Feb 10, 2009 2:09 pm
Location: North Wales via NZ
Contact:

Post by ged »

Well my cars been back on the road for a week now although I couldn't get an MOT test done until Friday. For some strange reason I had 45 miles on the trip meter. :lol: Anyway I went for a drive today (about thirty miles) & all seems ok. The newly rebuilt gearbox was tight at first but seems to be settling in. I just have to be patient running it in again, something I've never enjoyed doing. I'm hoping this is the last bit of bad luck for this year but if not as I always say, S*** happens deal with it!

Regards Ged.



Muscle-Manta
Forum Contributor
Forum Contributor
Posts: 343
Joined: Tue Mar 31, 2009 11:41 am
Location: Thatcham Berkshire

Post by Muscle-Manta »

Good to know your all sorted Ged. If you fancy a drive out for a meet sometime let me know.

Paul.

Coops
Site Admin
Site Admin
Posts: 6317
Joined: Fri Nov 17, 2006 7:43 pm
Location: Newbury, Berks
Contact:

Post by Coops »

glad your all sorted now mate,
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts. :D
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk

User avatar
ged
Forum Contributor
Forum Contributor
Posts: 668
Joined: Tue Feb 10, 2009 2:09 pm
Location: North Wales via NZ
Contact:

Post by ged »

Thanks fella's,

I'll post some pic's when I get my usb port working. :roll:

User avatar
ged
Forum Contributor
Forum Contributor
Posts: 668
Joined: Tue Feb 10, 2009 2:09 pm
Location: North Wales via NZ
Contact:

Post by ged »

usb working now, so here's a few pic's.

Engine freshly painted

Image

Image

Gearbox with locking bar

Image

DIY heater pipe :lol:

Image

Image

Home at last

Image
Billet alternator pulley & fan

Image
Billet water pump & p/s pump pullies
Image
Home made baffle
Image

Some of the old gearbox parts with the pullers.
Image
Last edited by ged on Fri Jul 14, 2017 7:42 pm, edited 1 time in total.

Bradham

:)

Post by Bradham »

Think you realy love your car, because haven't seen that good looking for years!

User avatar
bones
Forum Contributor
Forum Contributor
Posts: 1551
Joined: Wed Nov 22, 2006 10:08 am
Location: essex

Post by bones »

i missed this post :? . looking good young sir, :D rich

User avatar
ged
Forum Contributor
Forum Contributor
Posts: 668
Joined: Tue Feb 10, 2009 2:09 pm
Location: North Wales via NZ
Contact:

Post by ged »

Hi All,

I haven't updated this for a while so here's a few pic's. :D

I've just finished making & fitting these.

Image

Image

Image

Also a short vid of it running

Image
Regards Ged
Last edited by ged on Sat Jul 15, 2017 7:51 am, edited 2 times in total.

DaveEFI
Gold Member
Gold Member
Posts: 4603
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

Post by DaveEFI »

All you need now is decent ignition and injection. ;-)
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y

gelmonkey
Sergeant Monkey Face
Posts: 1307
Joined: Sat Jun 27, 2009 11:58 am
Location: plymouth

Post by gelmonkey »

Hi Ged
That really does look the Yak's knackers mate.
Now drive the tyres off it :D
Cheers
P

User avatar
ged
Forum Contributor
Forum Contributor
Posts: 668
Joined: Tue Feb 10, 2009 2:09 pm
Location: North Wales via NZ
Contact:

Post by ged »

DaveEFI wrote:All you need now is decent ignition and injection. ;-)
Want a race?
Last edited by ged on Sun Aug 13, 2017 7:53 am, edited 2 times in total.

User avatar
ged
Forum Contributor
Forum Contributor
Posts: 668
Joined: Tue Feb 10, 2009 2:09 pm
Location: North Wales via NZ
Contact:

Post by ged »

gelmonkey wrote:Hi Ged
That really does look the Yak's knackers mate.
Now drive the tyres off it :D
Cheers
P
Hi Paul,

Cheers mate & I will. :D

User avatar
ged
Forum Contributor
Forum Contributor
Posts: 668
Joined: Tue Feb 10, 2009 2:09 pm
Location: North Wales via NZ
Contact:

Post by ged »

Well I've been busy over the last month or so.

The pinion oil seal decided to leak & after spotting grease behind the extension housing mud shield I flipped the seal off the bearing to find the oil had washed all the grease out. So new seal & bearing. I dropped the back axle so I could give everything the once over.

Ready to go back in.

Image

Also decided to refurbish the gearbox extension housing. I stripped it & replaced the split bushes on the shaft then made a set of poly bushes.
A huge improvement in shifting! Much more precise.

Image

Next on the list was the sump was leaking due to grounding it after reversing off the MOT ramps. So new gasket & repaint.

Image

Then a cam change.

Image

Image

Image

All back together now & nice to drive.

Image

Regards Ged.
Last edited by ged on Sat Jul 15, 2017 8:08 am, edited 1 time in total.

Robrover
Getting There
Getting There
Posts: 338
Joined: Sat Nov 25, 2006 3:46 am
Location: Adelaide, Australia

Post by Robrover »

Looks great Ged, which cam did you change over to? Ever had it on a dyno?

bigaldart
Knows His Stuff
Knows His Stuff
Posts: 478
Joined: Wed Aug 20, 2008 11:35 am
Location: Chorley Lancs

Post by bigaldart »

Ged,

Looks great, would love to know more about the rocker gear, construction, materials, bearings used, any chance of making another set :)

I would really like to get some insight, might even consider making some ourselves.

Keep up the good work

Alan

Post Reply

Return to “Your Cars”