Figured out my bogging problem
Moderator: phpBB2 - Administrators
Figured out my bogging problem
I'm sticking too much gas into the engine on the launch. The revs are not high enough to cope with the gas. I'm fitting an rpm window switch to solve the problem.
Perry Stephenson
MGB GT + Rover V8
9.62 @ 137.37mph
Now looking for 8 seconds with a SBC engine
why not back the gas off a bit at the start?
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
I tried that Tony. But she doesnt launch hard enough.
I'm going to have a bash at the Sunday of USC to see if I can launch hard off gas, and bring it on big at 4000 rpm. She will handle a 75 shot off the line, but the 150 shot just bogs my old V8 down until the revs are above 4k.
I'm going to have a bash at the Sunday of USC to see if I can launch hard off gas, and bring it on big at 4000 rpm. She will handle a 75 shot off the line, but the 150 shot just bogs my old V8 down until the revs are above 4k.
Perry Stephenson
MGB GT + Rover V8
9.62 @ 137.37mph
Now looking for 8 seconds with a SBC engine
you using a controller?
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
Yep
But only a Mini max.
Cant afford as max Ex!!!
But only a Mini max.
Cant afford as max Ex!!!
Perry Stephenson
MGB GT + Rover V8
9.62 @ 137.37mph
Now looking for 8 seconds with a SBC engine
try and get hold of a second hand maximiser mate,
i use one, i want a max ex but i too cant afford one
i use one, i want a max ex but i too cant afford one
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
Agreed Paul
But my trusty 3500 has done so well for a 32 year old engine. And she has more to give too.
The old 215CI will make a 12 dead soon mate. Just need to get the launch and 60ft sorted. It is a whole new ball park with the auto, and I'm loving every minute of the learning curve. Especially with pistons only costing 13 quid each!!
But my trusty 3500 has done so well for a 32 year old engine. And she has more to give too.
The old 215CI will make a 12 dead soon mate. Just need to get the launch and 60ft sorted. It is a whole new ball park with the auto, and I'm loving every minute of the learning curve. Especially with pistons only costing 13 quid each!!
Perry Stephenson
MGB GT + Rover V8
9.62 @ 137.37mph
Now looking for 8 seconds with a SBC engine
Haha , that's awesomeEspecially with pistons only costing 13 quid
I think a controller here would see you in great shape, being able to ramp it up and get more down, without it bogging. Take a bit of the shock out of it as well.
Maybe an alternative would be a two-stage system? Not sure of the logistics on that one though.
How about a smaller torque convertor, so it'll spin up quicker? Con the gas into thinking you have a bigger motormgbv8 wrote:Agreed Paul
But my trusty 3500 has done so well for a 32 year old engine. And she has more to give too.
The old 215CI will make a 12 dead soon mate. Just need to get the launch and 60ft sorted. It is a whole new ball park with the auto, and I'm loving every minute of the learning curve. Especially with pistons only costing 13 quid each!!
I'm already using a holeshot 2800 converter. She locks up around 3000rpm.
Maybe if I fitted a 4000rpm stall converter I could do what you say Paul. Maybe I'll stick one in the new race car. I still like to have some road driveability on the MGB, and the 3000rpm stall speed just hangs on to a reasonable MPG.
Maybe if I fitted a 4000rpm stall converter I could do what you say Paul. Maybe I'll stick one in the new race car. I still like to have some road driveability on the MGB, and the 3000rpm stall speed just hangs on to a reasonable MPG.
Perry Stephenson
MGB GT + Rover V8
9.62 @ 137.37mph
Now looking for 8 seconds with a SBC engine
I forgot to add!
That makes sense Paul. My cam doesnt really get on top via the rhoades lifters until 3700 rpm. Then she will take shed loads of gas.
Food for thought, thanks.
Perry
That makes sense Paul. My cam doesnt really get on top via the rhoades lifters until 3700 rpm. Then she will take shed loads of gas.
Food for thought, thanks.
Perry
Perry Stephenson
MGB GT + Rover V8
9.62 @ 137.37mph
Now looking for 8 seconds with a SBC engine