lpg carb wiring correct,incorrect

Any posts regarding LPG to be posted here ONLY please.

Moderator: phpBB2 - Administrators

Post Reply
mcgill
Newbie
Newbie
Posts: 23
Joined: Thu Feb 05, 2009 3:07 pm
Location: ESSEX

lpg carb wiring correct,incorrect

Post by mcgill »

hi,lpg plumbed in,now the wiring.
I have an unusual old lpg switch,,manual control knob 4 clicks round,4 wires,- + p g (earth, live,live to petrol cut out,live to gas cut out).
All wiring diagrams explain about electronic switches and talk about a pulse live from HT or negitive coil.
my switch isnt like that so am i to assume,that the wiring,(minus fuses at selonoids) is as my below scribble? thanks all :)

Image



User avatar
bodger
Guru
Guru
Posts: 870
Joined: Sun Feb 11, 2007 7:37 pm
Location: dartford area

Post by bodger »

your GREEN bits ... the coil attachment is only used as a sense wire to detect the engine turning , that is so as soon as the engine stops the GAS stops too ..

the + on the switch should a fused / ign switched live ...
remember it's only a bodge if it DOSN'T worK

Post Reply

Return to “LPG Section”