lpg injection- pressure in fuel rail

Any posts regarding LPG to be posted here ONLY please.

Moderator: phpBB2 - Administrators

Post Reply
Quagmire
Knows His Stuff
Knows His Stuff
Posts: 377
Joined: Wed Jul 30, 2008 9:42 am
Location: Hook, UK

lpg injection- pressure in fuel rail

Post by Quagmire »

I need to decide on a pressure sensor to use in order to monitor gas pressure at the lpg injector rail and allow megasquirt to cut back to petrol when a lower threshold figure is reached.

Can anyone give me a rough idea of what pressures are normally seen on the vapour side? If Anyone knows what pressure causes theirs to cut back petrol that information would also be very useful!

Thanks
[/u]


1974 Rover 3500s
1984 3.5 90
1959 2.25 series 2

badger
Getting There
Getting There
Posts: 255
Joined: Sat Nov 18, 2006 12:28 am
Location: Elgin, Morayshire
Contact:

Post by badger »

The OMVL systems I install can be set to different pressures depending on application. 1.2 bar and 1.8 bar are, from memory, the two common settings.....
Badger.
"Real sport has 8 spark plugs"
www.roverv8engines.co.uk

Quagmire
Knows His Stuff
Knows His Stuff
Posts: 377
Joined: Wed Jul 30, 2008 9:42 am
Location: Hook, UK

Post by Quagmire »

Thanks :)
1974 Rover 3500s
1984 3.5 90
1959 2.25 series 2

Post Reply

Return to “LPG Section”