Page 1 of 1
lpg injection- manifold nozzles where?
Posted: Sat Nov 10, 2012 7:55 am
by Quagmire
I am fitting lpg injection to my 3.5 and looking for inspiration/confirmation of where to drill the manifold for th nozzles. Does anyone have any pics they can share of their setup?
Many thanks
Jamie
Posted: Sat Nov 10, 2012 1:50 pm
by ChrisJC
This is what I did:
http://www.cowdery.org.uk/rrlpg.php
But I doubt if you have the Thor inlet manifold.
It does work a treat though!
Chris.
Posted: Sun Nov 11, 2012 5:41 pm
by Quagmire
Thanks Chris, looks nice
I have the conventional plenum setup from a 4.6.
Do you think that if I drilled horizontally into the manifold just below where the trumpets attach that would work? May foul the fuel rail though... I'm conscious that I want to be close to the valve but dont want to be so close I upset airflow across the petrol injector
.
Posted: Sun Nov 11, 2012 6:10 pm
by ChrisJC
Drilling below the trumpets would be OK from a functional point of view, but as you say, clearance might be an issue. I suppose you could drill it with the manifold still with all the injectors / fuel rail attached.
Chris.