injector rubber washer
Posted: Mon Feb 13, 2012 5:09 pm
Hi folks.
I've got a prins LPG system on my landrover 3.9 but the injector rail is leaking. I've sourced some viton O-rings for the top but not the larger rubber washer in the pic below. Anyone got any suggestions. size is approx 11mm (ID) 16mm ED 7mm thick
I've got a prins LPG system on my landrover 3.9 but the injector rail is leaking. I've sourced some viton O-rings for the top but not the larger rubber washer in the pic below. Anyone got any suggestions. size is approx 11mm (ID) 16mm ED 7mm thick