Rover v8 3.9 valve springs & boost?

General Chat And Help Regarding Turbocharging and Supercharging.

Moderator: phpBB2 - Administrators

Pxr5
Newbie
Newbie
Posts: 44
Joined: Tue Oct 23, 2018 9:02 pm

Rover v8 3.9 valve springs & boost?

Post by Pxr5 » Sat Apr 27, 2019 2:23 am

At what boost will std springs (& cam) be ok with?, keeping well below the max RPM, thanks



User avatar
stevieturbo
Forum Contributor
Forum Contributor
Posts: 3543
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Re: Rover v8 3.9 valve springs & boost?

Post by stevieturbo » Wed May 01, 2019 5:36 pm

The cam wont care...and presumably if keeping a standard cam you dont intend to be using much boost anyway, so wouldnt worry too much.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

User avatar
Eliot
Top Dog
Top Dog
Posts: 1745
Joined: Sat Nov 18, 2006 9:46 am
Location: Milton Keynes
Contact:

Re: Rover v8 3.9 valve springs & boost?

Post by Eliot » Sat May 04, 2019 4:42 pm

stevieturbo wrote:
Wed May 01, 2019 5:36 pm
The cam wont care...and presumably if keeping a standard cam you dont intend to be using much boost anyway, so wouldnt worry too much.
Translation: why are you wasting your time with std stuff
Eliot Mansfield
5.7 Dakar 4x4, 4.6 P38 & BMW 750i
www.mez.co.uk / www.efilive.co.uk

Pxr5
Newbie
Newbie
Posts: 44
Joined: Tue Oct 23, 2018 9:02 pm

Re: Rover v8 3.9 valve springs & boost?

Post by Pxr5 » Sun May 05, 2019 10:13 pm

not at all helpfull......

unstable load
Top Dog
Top Dog
Posts: 1208
Joined: Mon May 04, 2009 6:53 am

Re: Rover v8 3.9 valve springs & boost?

Post by unstable load » Sun May 05, 2019 11:42 pm

Pxr5 wrote:
Sun May 05, 2019 10:13 pm
not at all helpfull......
Read the post properly...
The cam wont care...and presumably if keeping a standard cam you dont intend to be using much boost anyway, so wouldnt worry too much.
Cheers,
John

Pxr5
Newbie
Newbie
Posts: 44
Joined: Tue Oct 23, 2018 9:02 pm

Re: Rover v8 3.9 valve springs & boost?

Post by Pxr5 » Mon May 06, 2019 10:05 am

Re; Translation: why are you wasting your time with std stuff

unstable load
Top Dog
Top Dog
Posts: 1208
Joined: Mon May 04, 2009 6:53 am

Re: Rover v8 3.9 valve springs & boost?

Post by unstable load » Mon May 06, 2019 11:15 pm

I guess that depends on you and what your particular sensitivities are.
I saw it as an answer to your question, but you clearly don't.
Cheers,
John

Pxr5
Newbie
Newbie
Posts: 44
Joined: Tue Oct 23, 2018 9:02 pm

Re: Rover v8 3.9 valve springs & boost?

Post by Pxr5 » Tue May 07, 2019 12:04 pm

unstable load, Im greatfull for your input, I think the idea of tech help is that some one asks a question, & they get a responce that is constructive and perinent to the question...... Re; just saying, why bother is neither!

Eliot, Do me a favour, never respond to anything I ask, ok

User avatar
stevieturbo
Forum Contributor
Forum Contributor
Posts: 3543
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Re: Rover v8 3.9 valve springs & boost?

Post by stevieturbo » Tue May 07, 2019 6:43 pm

Eliot wrote:
Sat May 04, 2019 4:42 pm
stevieturbo wrote:
Wed May 01, 2019 5:36 pm
The cam wont care...and presumably if keeping a standard cam you dont intend to be using much boost anyway, so wouldnt worry too much.
Translation: why are you wasting your time with std stuff

Not at all....standard cam will work perfectly fine with boost. And if engine etc is already together and in the car....not really a lot of sense pulling it all apart unless he really wants to.

And likewise with springs...the fact it is still a standard cam and most likely low boost and has stated low rpm..there just isnt anything in that area to be concerned about, unless say the parts had 200k on them and they probably need replaced anyway.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

Pxr5
Newbie
Newbie
Posts: 44
Joined: Tue Oct 23, 2018 9:02 pm

Re: Rover v8 3.9 valve springs & boost?

Post by Pxr5 » Wed May 08, 2019 4:03 pm

Yes, I would have thought a non STD spec cam would be when you have forged pistons rods etc, Im on Rover cast pistons so thats why i fitted a new STD cam & followers.

User avatar
stevieturbo
Forum Contributor
Forum Contributor
Posts: 3543
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Re: Rover v8 3.9 valve springs & boost?

Post by stevieturbo » Sun May 12, 2019 3:56 pm

If it was a new build and you were actually buying a cam, I definitely would have bought something better than standard.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

Pxr5
Newbie
Newbie
Posts: 44
Joined: Tue Oct 23, 2018 9:02 pm

Re: Rover v8 3.9 valve springs & boost?

Post by Pxr5 » Mon May 13, 2019 4:39 pm

I stripped the engine & drilled tapped the mains for cross bolting, amongst my new RV8 parts I have was a cam, specs of 200 @50" & lift 433" in & ex'. so I used that.
For a road car to smoke about in, I thought that would work quite well....

User avatar
stevieturbo
Forum Contributor
Forum Contributor
Posts: 3543
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Re: Rover v8 3.9 valve springs & boost?

Post by stevieturbo » Fri May 17, 2019 9:11 am

It will...but always room for improvement.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

Pxr5
Newbie
Newbie
Posts: 44
Joined: Tue Oct 23, 2018 9:02 pm

Re: Rover v8 3.9 valve springs & boost?

Post by Pxr5 » Mon May 20, 2019 10:46 am

The question is though, at what level do you need rods, pistons & springs?

User avatar
DEVONMAN
Top Dog
Top Dog
Posts: 1421
Joined: Sat Dec 13, 2008 2:46 pm
Location: Croydon UK

Re: Rover v8 3.9 valve springs & boost?

Post by DEVONMAN » Tue May 21, 2019 6:30 pm

Pxr5 wrote:
Mon May 13, 2019 4:39 pm
I stripped the engine & drilled tapped the mains for cross bolting, amongst my new RV8 parts I have was a cam, specs of 200 @50" & lift 433" in & ex'. so I used that.
For a road car to smoke about in, I thought that would work quite well....
When you cross bolted the mains, did you have the block crank tunnel line bored ?
1950 A40 Devon Hotrod with 5.0 twin turbo RV8. (10 things to make you smile)
EDIS8 wasted spark, Holley Injection.
Been as far as the Moon and back in 54 year of driving. Same Car, 5 engine upgrades !!!


Image

Post Reply

Return to “Forced Induction”