HI
can anyone advise what the CO reading should be for a 3.9 Hotwire engine
cheers[/b]
Rover 3.9 hot wire CO
Moderator: phpBB2 - Administrators
- Ian Anderson
- Forum Contributor
- Posts: 2396
- Joined: Sun Nov 19, 2006 9:46 pm
- Location: Edinburgh
Mine is from 1990
3.5% and 1200 hc must not be exceeded
In the UK the emissions are based on age of car or engine whichever is older.
Need to prove age of engine.
Now put that same engine in a 1969 MG or Landrover and the emission requirements are visible smoke only
Ian
3.5% and 1200 hc must not be exceeded
In the UK the emissions are based on age of car or engine whichever is older.
Need to prove age of engine.
Now put that same engine in a 1969 MG or Landrover and the emission requirements are visible smoke only
Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.
-
- Newbie
- Posts: 17
- Joined: Fri Oct 10, 2014 7:15 pm