Su carb linkage

General Chat About Exhaust, Cylinder Heads, Fuel Systems And Intake

Moderator: phpBB2 - Administrators

Post Reply
Llohcins
Newbie
Newbie
Posts: 7
Joined: Sun Feb 19, 2017 1:56 pm

Su carb linkage

Post by Llohcins »

Hi all,

I am putting a rover p6 v8 into my Mgb gt. Although the engine is a little modified my funds are running low and I really want to hear it run so I am putting the original su carbs on. Unfortunately I only have one linkage which is the striaght one for the choke. Any advice or ideas where I can get the bent one for the throttle? I can't find one anywhere and although making one is on is a possibility it would be quicker and easier if I could find one.

Any advice would be great, thank you.



mike-b
Forum Contributor
Forum Contributor
Posts: 208
Joined: Thu Mar 25, 2010 8:49 pm
Location: Markfield, Leicestershire.

Post by mike-b »

Try Jim at JRV8 he has a link on this site. That would be my first call.
Mike B Drives a 1984 Mk2 Granada ghia V8.

Post Reply

Return to “Exhaust, Cylinder Heads, Fuel And Intake Area”