Kent Cams? Which one to go for?

General Chat About Exhaust, Cylinder Heads, Fuel Systems And Intake

Moderator: phpBB2 - Administrators

Post Reply
Chris
Newbie
Newbie
Posts: 9
Joined: Tue Jul 25, 2017 11:32 am

Kent Cams? Which one to go for?

Post by Chris » Wed Jul 26, 2017 3:58 pm

Hi all

I´m currently rebuilding a Rover 4.2 V8 engine of a Range Rover Classic to be mated with an auto gearbox.

I discovered Kent Cams products.

Now I'm not sure, whether to go for H180 (smm. profile) or H200 camshaft (assymm. profile).

H180

Applications Sports Torque
Power Band 1000-4500
Cam Lift(mm) 7.01mm Inlet/Exhaust
Valve Lift(mm) 11.20mm Inlet/Exhaust
Duration 262 Deg Inlet/Exhaust
Timing 23/59 59/23
Full Lift Inlet 108 Deg ATDC
VC (mm) 0.00mm Inlet/Exhaust
LTDC 1.42mm Inlet

H200
Applications Mild Road
Power Band 1000-4500
Cam Lift(mm) 6.83mm Inlet/7.18mm Exhaust
Valve Lift(mm) 10.89mm Inlet/ 11.50mm Exhaust
Duration 270 Deg Inlet/ 282 Deg Exhaust
Timing 23/67 68/34
Full Lif Inlet 112 Deg ATDC
VC (mm) 0.00mm Inlet/Exhaust
LTDC 0.83mm Inlet



Post Reply

Return to “Exhaust, Cylinder Heads, Fuel And Intake Area”