Allmakes rover rocker arms
Moderator: phpBB2 - Administrators
Allmakes rover rocker arms
How strong are they? i have turned in lathe rocker shaft hole bigger for bronze bush. Assembled with new rocker shafts. First time i did this was twelve something years ago for 3.5 carb engine. Good upgrade in my mind. No problems with 3.5 efi with hurricane cam and stock valve springs after four years either.
Now i am rebuildng 4.6 engine with crower 50232 cam and double valve springs.
Bronze bush O.D. is 23mm I.D. is 20mm
Pics in post 29
https://forums.offipalsta.com/showthread.php?t=103941
Are there any better rockers and rocker shafts than britpart and allmakes?
Too loose fit i think->not good for oiling to cam, crank and big end.
My question is are allmakes rockers too weak for bushing due increased spring pressure and more cam?
Roller rockers are too expensive for me😣
Now i am rebuildng 4.6 engine with crower 50232 cam and double valve springs.
Bronze bush O.D. is 23mm I.D. is 20mm
Pics in post 29
https://forums.offipalsta.com/showthread.php?t=103941
Are there any better rockers and rocker shafts than britpart and allmakes?
Too loose fit i think->not good for oiling to cam, crank and big end.
My question is are allmakes rockers too weak for bushing due increased spring pressure and more cam?
Roller rockers are too expensive for me😣
- Seight-V8
- Knows His Stuff
- Posts: 559
- Joined: Sun Jul 01, 2007 10:12 am
- Location: https://t.me/pump_upp
- Contact:
fed mogel steel ones if you can find a set, bought mine over 10 years ago now....but a good upgrade over standard....
some cheaper steel ones here.....but any better than standard?....made in china.....
http://www.v8tuner.co.uk/product.php?id=431
I think there was once some group A stuff.....but they must be gold dust by now......
Also I think some Volvo ones can fit, but I'm not to sure....
regards
scott
some cheaper steel ones here.....but any better than standard?....made in china.....
http://www.v8tuner.co.uk/product.php?id=431
I think there was once some group A stuff.....but they must be gold dust by now......
Also I think some Volvo ones can fit, but I'm not to sure....
regards
scott
-
- Top Dog
- Posts: 1278
- Joined: Mon May 04, 2009 6:53 am
Group A are 7/8" shafts, posts are steel and push rods to suit as well. As you say quite rare. I managed to get another set of rockers and shafts for spares but I still need to source posts and rods to suit
DSC01037
DSC01037
4.5L V8 Ginetta G27
Great👍 I have set of steel rockers from blue box in my shed and set of adjustable pushrods. If yours are some other brand i'm interested.minorv8 wrote:I think I still have a set of new steel rockers. I live in Helsinki so if you are interested I can try to find them.
Thank for other replies also.
-
- Top Dog
- Posts: 1278
- Joined: Mon May 04, 2009 6:53 am