The front cover arrived back from the vapour blaster with a bag of bits.
Thanks to Turner engineering who supplied a new piston for the oil pressure relief valve.
The oil pressure by pass valve has a hollow cylinder within the spring but what I don't know is should the relief valve have one too?
Gems front cover by pass valve
Moderator: phpBB2 - Administrators
Re: Gems front cover by pass valve
RAVE makes no mention of the insert. It specifically shows the piston, spring, end-cap and o-ring.
Chris.
Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Re: Gems front cover by pass valve
Thanks Chris,
my workshop manual and parts book makes no mention of the cylinder in either so I'm always a bit suspicious. It's a peculiar area with some vehicles having both and some, presumably without an oil cooler, only having the by pass valve with the other capped off.
my workshop manual and parts book makes no mention of the cylinder in either so I'm always a bit suspicious. It's a peculiar area with some vehicles having both and some, presumably without an oil cooler, only having the by pass valve with the other capped off.